Owens Corning Blown-In Insulation in Boulder City: What to Know First
Blown-in insulation in Boulder City typically runs $1,400 to $3,800 for an attic, with most single-story homes landing near $2,200. We install Owens Corning blown-in fiberglass and cellulose (plus Johns Manville, Knauf, Rockwool, CertainTeed, and GreenFiber, so there’s no product lock-in) and most jobs are completed in one day. Under The Haven Standard, you get a written price before any work starts and a Documented Photo Record when we leave. Call (844) 320-7926 and a live person picks up, 24/7.
This page is for Boulder City homeowners who already know they want Owens Corning insulation and want to understand how it performs here, what the price should be, and what happens on install day.
We’re an independent Owens Corning service provider. Envelope Insulation Boulder City is not affiliated with, sponsored by, or authorized by Owens Corning.
How Owens Corning Products Fail – and How We Fix Them
Owens Corning makes reliable insulation, and blown-in product rarely fails at the material level. What fails is the assembly around it. These are the Owens Corning-specific problems we actually see on Boulder City jobs:
- Pink fiberglass compresssion under the decking (AttiCat and ProPink blown-in fiberglass). When an installer blows loose fiberglass tight against the roof deck in a low-slope Boulder City attic, the product loses R-value where it compresses, and fiberglass loses roughly half its rated R-value per inch when packed. We rake to proper density and maintain the vent channel so the product keeps the R-value you paid for. On slab-on-grade homes near the Boulder City Golf Course, radiant heat from the roof deck makes compression worse.
- Cellulose settling in the low spot (Owens Corning ProPink Loose Fill is fiberglass; our cellulosic line settles against attic slope). Boulder City’s older single-story stock, especially near the historic district, often has attic floors that slope. Cellulose finds the low corner first, thinning coverage near the high side. We check installed depth at multiple points and top up uneven spots, so the R-value holds across the whole attic rather than in one photo.
- Vapor barrier behind the blown-in, then no air seal. Homeowners sometimes ask us to blow over existing attic floor insulation to top up R-value. If the top plates, wiring penetrations, and can lights underneath aren’t sealed first, the new layer traps conditioned air and does nothing for the infiltration that drives Boulder City summer cooling bills. We won’t blow over an unsealed attic floor – air sealing comes first, no exceptions.
- Can light gaps hidden by the previous layer. Recessed can lights are the number-one hidden air path in Boulder City attics. Insulation blowers won’t find them; a blower door and an infrared scan will. We seal them with a code-compliant air barrier cover before the new product goes down.
- Chute gaps at the eaves. Baffles for attic ventilation often get installed loosely during original construction. A top-up job that doesn’t address those gaps ends up with insulation drifting into the soffit and blocking the vent. We check every eave bay and reset the baffles before we start blowing.
Owens Corning doesn’t make these failure modes. They are assembly problems, and they are fixable – but only if the air sealing comes first.
Our Owens Corning Blown-In Insulation Process

- 1
Free inspection and written scope. We walk the attic, measure existing R-value and installed density, and photograph every penetration and baffle we find. You receive a written price and written warranty before anyone lifts a tool – Haven Standard Clause 1.
- 2
Blower-door test (where applicable). A baseline pressurization reading in CFM50 shows how much air the envelope is losing. For homes with an existing test record, we compare against it. This is the number that proves whether the sealing actually worked.
- 3
Air sealing before any insulation. Top plates, can lights, wire and plumbing penetrations, and attic access hatches get sealed with foam and rigid barriers rated for the assembly.
- 4
Baffles and vent channels. We reset and secure every eave baffle so the new product can’t settle into the soffit or block intake air.
- 5
Owens Corning install to target R-value. We blow to a measured depth across the whole attic – not to a single depth marker – and check density at multiple points.
- 6
Post-install blower-door test and Documented Photo Record. We publish before-and-after CFM50 readings for applicable jobs, hand over a written record and photos, and back it with the 365-Day Done Right Promise.
What Owens Corning Blown-In Insulation Costs in Boulder City
These ranges reflect real Boulder City pricing in 2026. Every number is a flat, written price before work begins.
- Attic top-up (existing insulation already present): $1,400 – $2,400 for a typical 1,200 – 1,800 sq ft home.
- Full attic blow-in, R-49 fiberglass, no removal: $2,000 – $3,200.
- Full attic blow-in plus air sealing: $2,600 – $4,000, including the top-plate, can light, and penetration work.
- Owens Corning fiberglass vs. cellulose material difference: roughly $200 – $450 more for fiberglass at the same R-value.
- Removal of old deteriorated insulation before reinstall: $800 – $1,600.
- Blower-door test (before and after): $295 – $445 when added to an insulation job.
Price drivers in Boulder City: attic accessibility, roof pitch and vent configuration, how much sealing is needed, and whether the existing product has to come out. Call (844) 320-7926 for a free estimate, and bring us a competing written quote – the Free Second Opinion is included at no charge.
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Owens Corning Work

We won’t blow Owens Corning insulation over an unsealed attic floor. That single rule separates us from most Boulder City installers, and it’s the reason our before-and-after blower-door numbers show a real change rather than a new color in the attic. Our technicians have up to 10 years of experience, and every one of them is background-checked and uniformed. We publish a Documented Photo Record on every visit – no request needed – and back every job with the 365-Day Done Right Promise. If a job didn’t come out right, we come back and make it right.
We install Owens Corning alongside materials from Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, plus Reflectix radiant barrier products where the assembly calls for it. If Owens Corning isn’t the right product for your Boulder City attic, we’ll tell you, in writing, before you pay us anything.
FAQs
No, blown-in Owens Corning insulation won’t void a standard asphalt shingle roofing warranty when ventilation is maintained. The problem we see is installer error: a blower who blocks the eave baffles or packs product against the deck can void the roof warranty because ventilation is compromised. We reset every baffle and maintain the intake channel so that doesn’t happen on your Boulder City install.
Yes, with one condition: the attic floor must be air-sealed first. Blowing fresh Owens Corning loose fill over unsealed top plates and can lights traps conditioned air and leaves the real air paths untouched – a common Boulder City scenario in homes built before 2005. We’ll never do that, even if a homeowner asks, because it doesn’t solve the leak and it wastes the product.
Most Boulder City attic jobs finish in one day – typically four to six hours on-site for a single-story home. Air sealing, baffle work, and the blower-door test add time. Jobs with old insulation removal or difficult attic access sometimes run to the following morning. Call (844) 320-7926 and we’ll give you a realistic time window in writing with the price.
Fiberglass holds R-value longer in hot attics like Boulder City’s, but cellulose costs less and has better sound dampening. Fiberglass is roughly $200 – $450 more at the same R-value on a typical home. Neither is universally “better” – the right call depends on your roof deck, existing product, and venting.
Owens Corning publishes its own material warranties on the insulation itself, and our workmanship carries the 365-Day Done Right Promise – if it’s not done right, we make it right. You get the written scope and written warranty before any work starts, so there’s no question about what’s covered. Call (844) 320-7926 to schedule a free estimate.
Ready for a Written Price on Owens Corning Blown-In Insulation in Boulder City?

Call (844) 320-7926 – a live person answers 24/7, no voicemail loops, no callback windows. We’ll inspect your attic, measure existing R-value, run a blower-door test where it applies, and hand you a written price and written warranty before anyone touches a tool. Zero-pressure estimates, honest second opinions, and a Documented Photo Record at the end of every visit.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.