A Topside company - serving Boulder City, NV

Rockwool Home Energy Audit in Boulder City, NV

Rockwool Home Energy Audit in Boulder City: What to Know First

A Rockwool home energy audit in Boulder City typically takes two to four hours on site, and most homeowners get a written scope and flat price within one business day of the visit. The audit itself usually runs $350 to $650 depending on square footage and how many diagnostics you want, and that fee is credited toward the insulation work if you move forward. We’re an independent Rockwool service provider, not affiliated with or authorized by Rockwool.

Call (844) 320-7926

This page is for Boulder City homeowners whose homes already have Rockwool insulation products installed and who want to know whether the envelope is actually performing before they spend money on more material. Call (844) 320-7926 for a written price before any work starts.

How Rockwool Products Fail – and How We Fix Them

Rockwool is a mineral wool product, and it fails differently than fiberglass or cellulose. It doesn’t settle, it doesn’t support mold growth, and it holds its R-value well when it’s dry and undisturbed. What goes wrong in Boulder City homes is almost always installation or envelope related, not product related. Here are the failure modes we see most often on audit.

  • Comfortbatt batts compressed at the eaves. When batts are stuffed into a low-clearance attic corner without a baffle, they get crushed to half their rated thickness and lose R-value fast. In Boulder City’s summer attic temperatures, which routinely climb past 140°F, that compressed corner becomes a hot spot the AC never catches up to. We measure the actual installed depth at multiple points and flag every compressed bay, then re-support the baffles and re-set the batts to full loft.
  • Safe’n’Sound used where thermal batts belong. Safe’n’Sound is a sound-attenuation product, not a thermal product, and we find it in interior walls and sometimes attic knee walls where a previous installer used whatever was on hand. The thermal performance is nowhere near Comfortbatt, and the audit’s thermal imaging shows it immediately as a cool or hot band. We document it and recommend the correct Rockwool thermal line for the application.
  • Rockwool batts installed over an unsealed attic floor. This is the big one. Mineral wool is air-permeable, so if the top plates, can lights, and wire penetrations underneath were never sealed, the batts insulate a column of moving air and the home keeps leaking. We see blower-door readings of 3,800 to 4,500 CFM50 on homes that already have full Rockwool coverage, purely because nothing was sealed first. We won’t blow or lay insulation over an unsealed attic floor, full stop.
  • Roxul-to-Rockwool transition gaps. Older Boulder City installs sometimes carry the Roxul branding, and the transition between an older Roxul run and a newer Rockwool run is often where the depth, density, or facing changes and the air barrier breaks. Thermal imaging catches the seam. We bridge it with matching product and seal the transition.
  • Mineral wool in a wall cavity with no vapor strategy. In Boulder City’s dry desert climate the wall needs to dry to the interior, and a batts-only wall with a poorly placed vapor retarder traps moisture at the sheathing. The audit’s insulation inspection and moisture readings show it. We correct the assembly rather than just adding more wool.

Our Rockwool Home Energy Audit Process

professional attic insulation service
Our Rockwool Home Energy Audit Process

Every Rockwool job follows the same sequence, and nothing gets skipped to save a day.

  1. 1
    Call and schedule. A live person answers 24/7, and under Haven Standard: Arrive on schedule you get a named technician and a text when they’re on the way.
  2. 2
    Diagnostics on site. Blower-door test – a pressurization reading that shows, in one number, how much air your building envelope is losing – plus thermal imaging, a physical insulation inspection of every accessible cavity, and a duct leakage test where the ductwork is accessible.
  3. 3
    Written findings. You get a written scope that names what we found, where, and what it costs to fix, with a flat price before any work starts. The Documented Photo Record is included, not available on request.
  4. 4
    Parts decision. If Rockwool material needs replacing, we quote the correct current Rockwool line. We source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so there’s no proprietary lock-in and we tell you plainly when a different mineral wool or fiberglass line is the better economic call for your assembly.
  5. 5
    Seal first, then insulate. Air sealing of top plates, can lights, and penetrations is completed before any insulation goes in. In that order, every time.
  6. 6
    Test-out and guarantee. We re-run the blower door and give you the before-and-after numbers side by side. The 365-Day Done Right Promise applies; if it’s not done right, we make it right.

What Rockwool Home Energy Audit Costs in Boulder City

Pricing below reflects what Boulder City homeowners actually pay for these jobs, not a national average.

Service Typical range
Blower-door test (standalone or as part of audit) $250 – $400
Full home energy audit with thermal imaging and insulation inspection $350 – $650
Duct leakage test $200 – $350
Attic air sealing (top plates, can lights, penetrations) $1,200 – $2,800
Rockwool batt re-set, baffling, and transition repair $600 – $1,800
Full attic insulation replacement with correct Rockwool thermal line $2,400 – $5,200

What moves the price: attic accessibility, the number of can lights and penetrations to seal, whether the existing Rockwool needs removing or can be re-set, and whether ductwork runs through unconditioned space. Homes over 2,500 square feet sit at the top of the ranges. Estimates are free, and so is a second opinion on any written estimate you bring us.

Why Boulder City Homeowners Call Envelope Insulation Boulder City for Rockwool Work

Professional technician installing fiberglass batt insulation in an attic
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Rockwool Work

Because we publish the numbers. On applicable jobs you get before-and-after blower-door readings, so you can see the air-sealing result you actually paid for instead of a paragraph telling you it feels better. Our technicians have up to 10 years of experience with mineral wool assemblies, and they know why a compressed Comfortbatt bay or a Safe’n’Sound mix-up reads the way it does on thermal imaging before they touch anything.

We work with Rockwool alongside Reflectix and the other major material lines, so we have no reason to steer you toward one product. Calls are answered by a live person 24/7. Every visit includes a Documented Photo Record, every job starts with a written price, and the 365-Day Done Right Promise backs all completed work.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Insulation help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 320-7926
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Envelope Insulation Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch