Icynene Wall Insulation in Boulder City: What to Know First
We provide independent Icynene wall insulation in Boulder City, and most wall jobs here are finished in a single day – injection foam into a finished wall goes faster than cutting and patching drywall. On price, a single exterior wall cavity with injection foam runs $28 to $55 per cavity depending on depth and access. We don’t quote from a phone call; the written price comes after we’ve looked at the wall assembly, and no work starts until you’ve seen it. As an independent Icynene service provider, we’re not affiliated with or authorized by the manufacturer.
This page is written for Boulder City homeowners who already have Icynene in their walls – usually medium-density open-cell spray foam from a 2010s-era build – and need it topped up, repaired, or extended into a wall it never reached. Call (844) 320-7926 and a live person answers, day or night.
How Icynene Products Fail – and How We Fix Them
Boulder City’s climate is brutal on foam in ways the desert further south isn’t. Summer surface temps on south- and west-facing walls here push past 160°F, and winter nights drop into the 20s. That daily expansion and contraction is what drives most of the failures we open walls to find. Here’s what we actually see on Icynene jobs in Boulder City:
- Shrinkage away from studs on Icynene MD-R-200 and MD-R-210 medium-density foam. Open-cell and low-density foam cures at roughly 0.5 lb/ft³ and shrinks 1-3% as it cures, pulling back from the stud face and leaving a thin gap. In a Boulder City wall cycling through 140-degree temperature swings, that gap becomes an air channel. We find it with a blower-door test – a pressurization reading that shows, in one number, how much air your building envelope is losing – then inject slow-rise foam into the gap rather than caulking the surface. Surface caulk doesn’t address the channel behind it.
- Cracking and crumbling in the first year on Icynene X-1 and similar legacy low-density products. Older Icynene Gold and X-series foam applied before the mid-2000s often goes brittle in low humidity. When we open a wall in Boulder City homes built in that window, the foam shears at stud edges when tapped. There’s no repair that restores it – the fix is removal and re-application, and we price removal separately so you see what you’re paying for.
- Missed cavities from a partial spray. Icynene installations in the 2015-to-2020 building boom commonly skipped the wall cavities above certain window heads or behind plumbing, because the spray gun can’t reach them. Homeowners don’t discover this until a cold night shows a draft from one room. We scope the wall with a thermal camera before quoting, and the drill-and-fill quote reflects what’s actually empty, not an estimate.
- Foam over unsealed top plates and penetrations. This is the failure we find on nearly every Boulder City job: spray foam went in over an unsealed electrical penetration or top plate, and the foam now hides the leak. We air-seal first – top plates, can lights, wiring penetrations – then add foam. Sealed first, then insulated, in that order. Blowing foam over an unsealed wall is how you spend money and still feel a draft.
- Moisture trapping where a wall meets a garage or a slab. Icynene is an air barrier, not a vapor barrier. When the wall-to-slab junction on a Boulder City home was never detailed, summer humidity migrates in and the closed surface traps it. We check the dew point on the wall assembly before adding foam, because adding insulation to a wall that’s already trapping moisture makes the problem worse.
Our Icynene Wall Insulation Process

Every Icynene job in Boulder City follows the same order, whether it’s one wall cavity or a whole-house retrofit:
- 1
Diagnostics. Thermal scan of every wall on the scope, plus a blower-door test where the job warrants it. We photograph what we find and note the series and vintage of the existing Icynene.
- 2
Written price. A flat price with a written scope – cavity count, series, depth, whether removal is included – and a written warranty. Haven Standard Clause 1: no one lifts a tool until you have it.
- 3
Air sealing first. Top plates, penetrations, and can-light housings are sealed before any foam goes in. This isn’t optional; it’s the step that makes the insulation work.
- 4
Injection or drill-and-fill. For finished interior walls, we drill from the exterior or interior in a staggered pattern and inject slow-rise foam through the holes, then patch. For open walls or exterior cladding removal, direct spray. Injection avoids tearing up drywall and keeps the Boulder City job under two days in most cases.
- 5
Test and photo record. A post-install blower-door reading where applicable, plus a documented photo record of every cavity we treated – included on every visit, not available on request.
- 6
365-Day Done Right Promise. If a cavity settles, shrinks, or we missed something, we make it right within a year, backed by the written warranty you already have.
What Icynene Wall Insulation Costs in Boulder City
Wall insulation pricing in Boulder City runs higher than most of the valley because wall assemblies here tend to be deep – 2×6 framing with stucco over sheathing – and that changes the foam volume and the drill pattern. Here’s what we quote:
- Single exterior wall cavity, injection foam: $28-$55 per cavity, depending on cavity depth, cladding, and whether drywall patching is included.
- Full exterior wall, roughly 1,200 sq ft of finished wall: $1,900-$3,400, injection foam with patching.
- Interior wall soundproofing (open-cell foam, one room): $650-$1,400, drill-and-fill.
- Removal of failed legacy Icynene, plus re-insulation: $4.00-$7.50 per sq ft, because removal and bagging runs separately and adds a day to most Boulder City jobs.
- Post-install blower-door test: included where the scope warrants it, priced as part of the job, not an add-on line.
What moves price: cavity depth, whether the wall is finished or open, removal of failed product, and access to walls above window heads or behind plumbing. Bring us a competing written estimate and we’ll read it with you, free – Haven Standard: Free Second Opinion.
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Icynene Work

Our technicians have up to 10 years of experience – many of them trained on Icynene specifically, and all of them cross-trained on the other Icynene lines (MD-R, X-1, and the current name-brand equivalents) so a wall spec doesn’t decide which crew shows up. We source materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so if a wall in a Boulder City home calls for a different product, we’re not going to force Icynene into a place it doesn’t belong. We also handle Reflectix and other radiant barrier work when a wall or attic scope calls for it.
What makes the difference on Icynene work here: before-and-after blower-door numbers published on every applicable job, so you can see in a single reading how much conditioned air the home was losing before the sealing and after. A written price before any work starts. A documented photo record of every cavity, included. And a 365-Day Done Right Promise on every completed job, backed by the written warranty. Call (844) 320-7926 and a live person answers – no voicemail loops.
FAQs
Is my Icynene wall insulation still under warranty? The Icynene product itself may carry a limited manufacturer warranty, but that warranty generally doesn’t cover the installation – the shrinkage, the missed cavities, the unsealed top plate. That’s why every Envelope Insulation Boulder City job comes with our own written warranty on the installation, separate from any product warranty. Call (844) 320-7926 for a free estimate; we’ll read your existing documentation with you.
How fast can you get to a wall in Boulder City? Most Icynene wall insulation jobs in Boulder City start within a week of the written price being signed, and finished-wall injection work usually completes in a single day. We answer calls 24/7, so the first question – whether we can come out – gets answered the same day you call.
Can you match my existing Icynene in a partial-wall job? Yes. For a cavity or two, we inject a product matched to the density and open-cell or closed-cell spec of what’s already there – which is the key decision, and the one most contractors get wrong. Adding closed-cell foam next to open-cell causes moisture issues at the wall assembly. We specify the match before pricing the job, and the written scope names the product.
Is it cheaper to repair or replace failed Icynene? Repair is almost always cheaper if the foam is intact and only the sealing is failing – usually the case on a 2015-to-2022 Boulder City build. Full removal and re-application runs $4.00-$7.50 per sq ft, so we don’t recommend it unless the foam has gone brittle or is trapping moisture. A thermal scan and blower-door test tells us which situation you’re in before we quote. Call (844) 320-7926 for a free estimate and we’ll tell you which number you’re looking at.
Do you work on other foam brands, or only Icynene? We work on Icynene as an independent service provider and also handle Demilec and the other foam lines on the same wall scope. If a Boulder City home has Reflectix radiant barrier in the wall or attic, we handle that too. The written scope names the product every time.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.