Demilec Home Energy Audit in Boulder City: What to Know First
We provide independent Demilec home energy audit service in Boulder City, and most audits are completed in a single visit with a blower-door reading, thermal imaging, and a written report in hand the same day. You get a flat written price before any diagnostic starts, and the report tells you in plain numbers where your Demilec-insulated envelope is losing air. Just as important: we’re not affiliated with or authorized by Demilec. We’re an independent Demilec service provider, which means we grade the foam on its actual performance, not on a brand sales sheet.
This page is for Boulder City homeowners who already have Demilec spray foam in the attic, walls, or rim joists and want to know whether that investment is doing its job. Call (844) 320-7926 and a live person answers.
Key Takeaways
- A home energy audit in Boulder City runs $350 to $650 depending on square footage and how many diagnostic tests you need.
- Demilec foam that was sprayed over an unsealed attic floor shows up as air leakage in a blower-door test even when the foam itself is intact.
- We publish before-and-after blower-door numbers so you can see, in a single figure, what the work changed.
How Demilec Products Fail – and How We Fix Them
Demilec makes several lines, and each fails differently once it’s been in a Boulder City home for a few years. The desert swing between 100°F summers and freezing winter nights is hard on foam, and Boulder City’s older housing stock adds its own problems. Here’s what our technicians actually find on Demilec jobs and what we do about it.
- Soya-based open-cell in the attic, sprayed over an unsealed floor. We see this constantly: Demilec open-cell (often their Soya line) blown or sprayed right over top plates, can lights, and wire penetrations that were never sealed. The foam looks complete, but the blower-door test still reads high because air moves around and under it. Our fix is to locate the leaks with thermal imaging, seal the penetrations first, and only then assess whether the foam needs topping off. Sealed first, then insulated, in that order.
- Shrinkage at the rim joist. Closed-cell Demilec in the rim joist area can pull back from the wood as it cures and ages, leaving a hairline gap that lets cold air straight into the floor cavity. Thermal imaging catches it at the corner where the sill meets the foundation. We map every gap and give you a written scope before anything is re-sprayed.
- Foam that hides rot and moisture. Closed-cell foam traps moisture against wood if it was sprayed on a damp surface, and the damage stays invisible until an audit opens the wall or the thermal camera shows a cold spot. On a Demilec audit we read moisture alongside temperature so you know whether you’re looking at an air leak or a water problem.
- Duct leakage the foam never addressed. Many Boulder City homes have Demilec in the envelope but leaky flex duct in the attic. A duct leakage test tells you how much conditioned air is escaping before it ever reaches a room. It’s a separate measurement from the blower door, and it changes the fix.
- Off-gassing or cure complaints in humid months. Some homeowners notice a smell after a Demilec install, especially if the foam went in during a wet stretch and the cure was incomplete. We document what we find rather than guess, and we tell you whether the symptoms point to a cure problem or a ventilation problem.
Our Demilec Home Energy Audit Process

Every Demilec audit follows the same sequence, and you get a written price before Step 1 begins. Here’s what the job looks like from your call to the moment we hand you the record.
- 1
Intake and scheduling. A live person takes your call 24/7. We ask what Demilec product you have, when it went in, and what you’re noticing. You get a named technician and a text when they’re on the way.
- 2
Visual and thermal inspection. The technician walks the attic, rim joists, and any accessible wall cavities with a thermal camera, photographing every anomaly. That’s your Documented Photo Record, included on every visit.
- 3
Blower-door test. We pressurize the house and record the CFM50 reading: one number that shows how much air your envelope is losing. If ducts are the suspect, we run the duct leakage test too.
- 4
Parts and materials decision. Where re-spray or sealing is needed, we explain OEM Demilec product versus a quality equivalent and the warranty implications of each. We source from Demilec, Icynene, Owens Corning, and others, so there’s no product lock-in.
- 5
The report. You leave the visit with a written scope, the thermal images, the blower-door number, and a flat price for any recommended work.
- 6
Post-work verification. If you proceed, we run the blower door again after the work and give you the before-and-after figures, backed by the 365-Day Done Right Promise.
What Demilec Home Energy Audit Costs in Boulder City
Audit pricing in Boulder City depends mainly on square footage and how many diagnostic tests your home needs. Here are the ranges we quote.
| Service | Typical Range |
|---|---|
| Standard home energy audit (blower door + thermal imaging) | $350 – $480 |
| Audit with duct leakage test | $480 – $650 |
| Insulation inspection and written report only | $150 – $250 |
| Re-spray / air sealing of Demilec gaps (per area) | $400 – $1,200 |
What moves the price: home size, number of diagnostic tests, and whether we find moisture or rot that needs a separate scope. Every figure above is confirmed in writing before we start, and a free second opinion on any competing estimate is always available. Call (844) 320-7926 for an exact quote; the estimate is free.
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

We work on Demilec every week, and we also service Reflectix and the other major brands, so we can tell you honestly whether your foam needs attention or not. Our technicians have up to 10 years of experience and they’re background-checked and uniformed. Every job runs under The Haven Standard, which means a written price before any work starts, a written warranty, and a Documented Photo Record when we leave. The 365-Day Done Right Promise covers completed work. Because we treat air sealing as a hard prerequisite to insulation, we won’t talk you into more foam if the real problem is an unsealed penetration. That’s what sets a Demilec audit here apart from a generic inspection.
FAQs
No. A diagnostic audit doesn’t touch your installation, so it has no effect on any Demilec product warranty. Where we do recommend re-spray or sealing, we explain the warranty implications of OEM versus equivalent materials before you decide. Call (844) 320-7926 to talk it through.
Yes, we can source Demilec OEM material, and we also offer quality equivalents when they perform the same. We’ll show you both and the price difference so you choose. Bring a competing quote and we’ll read it with you at no charge.
Repair is nearly always cheaper when the foam is structurally sound and the problem is a gap or missed penetration, which is the case most of the time. Full removal only makes sense if the foam is failing broadly or trapping moisture. The audit tells you which one you’re dealing with.
Most audits are scheduled within a few days and finished in a single visit, with your report the same day. For homes with suspected water damage, we prioritize. A live person answers your call 24/7.
The blower-door reading is a pressurization figure that shows, in one number, how much air your envelope is losing. A drop from, say, 4,000 CFM50 to 2,200 means the work cut that leakage roughly in half. We publish both numbers on every applicable job. Call (844) 320-7926 for a free estimate.
Call (844) 320-7926 to schedule your Demilec home energy audit in Boulder City. You’ll get a written price before any work starts, a free estimate, and a documented record when we leave.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.