Fast, Reliable Attic Air Sealing Across Boulder City
If you own one of the original Boulder Homes near the Historic District, or a mid-century ranch off Nevada Way, you already know the pattern: the AC runs nonstop from June through September and the rooms still feel hot. That’s usually not a failing air conditioner. It’s an attic floor full of gaps that lets 150°F air pour straight down into your living space. Our Attic Air Sealing work in Boulder City starts by finding those gaps with a blower-door test, sealing them, and only then adding insulation. Call (844) 320-7926 and a live person answers, day or night.
Why Envelope Insulation Boulder City Is Boulder City’s Preferred Attic Air Sealing Company
We treat air sealing as a prerequisite, not an upsell. No technician working through Envelope Insulation Boulder City will blow insulation over an unsealed attic floor, and that rule is written into every scope before a tool comes out of the truck. Our technicians have up to 10 years of experience, and they’ve learned that Boulder City attics behave differently from Henderson attics two ridges over.
What you get in writing: a flat price before any work starts, a written warranty, and a Documented Photo Record of every visit. On jobs where it applies, we publish before-and-after blower-door numbers – a pressurization reading that shows in one figure how much conditioned air the home was losing before sealing and how much it loses after. That’s the number you actually paid for. The 365-Day Done Right Promise backs all completed work, and a free second opinion on any written estimate means you can bring us a competing quote and we’ll read it with you.
Our Attic Air Sealing Services in Boulder City

Boulder City housing splits into two worlds: the federally built Boulder Homes from the 1930s and ’40s, and the mid-century ranch and newer infill around them. The sealing work follows the house.
Attic Floor Air Sealing
In a typical Boulder Home, we open the attic and find unlined joist bays, gaps around every can light, and a top plate that never had a gasket. The only “insulation” is sometimes 1930s newspaper or horsehair. We seal the floor plane first – every penetration calked with fire-rated material and foamed – and only then do we recommend adding insulation. That order is the whole job.
Top Plate & Penetration Sealing
The top plate is where your walls meet the attic floor, and in original Boulder City homes it’s usually the biggest leak in the building. Unsealed, it lets hot attic air slide down into wall cavities and rooms all summer. We seal top plates, wiring penetrations, plumbing chases, and the gaps around bath fans and recessed fixtures with fire-rated caulk and expanding foam rated for the application.
Can Light & Duct Boot Sealing
Recessed can lights are a straight hole from your ceiling into a 150°F attic. Most original Boulder City cans were never rated for contact with insulation and were never sealed to the drywall. We build an airtight box around each one from fire-rated materials so the fixture stays cool and the attic air stays where it belongs. Duct boots at the ceiling line get the same treatment, because a leaking boot loses the cool air before it ever reaches the room.
Attic Hatch Sealing
The original attic hatches in these homes warp in the desert heat – no gasket, no latch, just a 24-inch square hole in your ceiling that leaks conditioned air year-round. We rebuild the hatch with a gasketed, latched cover and seal the frame to the ceiling plane. It’s a small job with a real return during both the July heat and the near-freezing nights in January.
Trusted Brands We Service in Boulder City
Materials matter in a 150°F attic. We source from Owens Corning, Johns Manville, Knauf, and Rockwool, along with GreenFiber for blown-in work and Icynene and Demilec for foam where it fits. No proprietary lock-in, so we spec the product the house needs rather than the one a manufacturer is pushing that quarter. If a Boulder City homeowner has a particular brand on a competing estimate, we’ll read it with them. We don’t stock parts locally; materials come from the supplier for each job, which keeps turnaround quick for Boulder City addresses.
Common Attic Air Sealing Problems We See in Boulder City Homes

The failure modes here are specific to the housing stock, which is why a generic air-sealing checklist misses half of them.
- Unsealed top plates and can lights in original Boulder Homes. Even a brand-new AC struggles when 150°F attic air pours down through these gaps. Homeowners call us convinced the unit is broken; usually the unit is fine and the ceiling is the problem.
- Solid masonry walls with no cavity. Standard batt sealing won’t work here because there’s nothing to seal inside. Air sealing has to rely on exterior caulking and interior plaster repair instead.
- Warped original attic hatches. A hatch with no gasket or latch bows in the heat and becomes a permanent 24-inch square air leak. It’s one of the cheapest fixes on the list.
- Unlined attics hitting 150°F in July. Before any new insulation goes in, these attics need a radiant barrier and baffles to manage the heat load, or the insulation just bakes.
Pricing for Attic Air Sealing in Boulder City, NV
You deserve the range on the page, not a callback for pricing. In Boulder City’s market, attic floor air sealing on a typical 1,200 to 1,600 square foot home runs $1,400 to $2,800, and top plate and penetration sealing for a smaller original Boulder Home usually lands between $900 and $1,800. Can light and duct boot sealing is often $75 to $150 per fixture, attic hatch sealing runs $250 to $500, and a before-and-after blower-door test adds $300 to $500 depending on house size and how many penetrations get documented. Masonry-wall sealing is quoted separately because there’s no cavity to work with and the approach is different. Written price before any work starts, always. Bring us a competing estimate and a free second opinion comes with it.
We Also Serve Cities Near Boulder City

The same blower-door-first approach covers homeowners in Henderson, Whitney, Paradise, and Enterprise. The housing is different out there – more batt-and-poly construction, fewer unlined masonry walls – but the principle doesn’t change: seal the envelope, measure it, then insulate. If you’re in any of these areas and reading up on Boulder City attic work because a neighbor referred us, we cover your address too.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Attic Air Sealing in Boulder City

A 1930s Boulder Home has no wall cavity to seal and an unlined attic that can hit 150°F in July, so the work has to address solid masonry joints and single-board walls that newer batts-and-poly construction never had. The original “insulation” is often newspaper or horsehair, and the top plate was never gasketed. We seal; fire-rated caulk and foam go into every penetration before a single batt goes down. A newer ranch in Boulder City gets a standard sealing package; a Boulder Home gets a retrofit scoped for the specific walls and joist bays we find. Call (844) 320-7926 for an exact quote – estimates are free.
Electric bills climbing while the AC runs nonstop, rooms that stay hot despite the thermostat, and visible gaps around can lights or the top plate from inside the attic are the clearest signs. In Boulder City’s Boulder Homes, a warped attic hatch and drafts at exterior walls in winter point the same direction. Blown insulation over those gaps is money spent on the wrong thing; the leak stays and the insulation just sits on top of it. A blower-door reading confirms it in one number – call (844) 320-7926 for a free estimate.
Yes, and it’s often the biggest single improvement for a 1930s-’40s Boulder Home. Sealing the attic floor, top plate, can lights, and hatch stops 150°F attic air from pouring into living space, which is exactly what overwhelms even a new AC unit in July. Air sealing alone usually isn’t the whole fix – a radiant barrier and baffles handle the solar gain, and insulation goes on top of the sealed plane – but the sealing has to come first. Call (844) 320-7926 and we’ll price the full scope in writing.
We rebuild the hatch with a gasketed, latched cover and seal the frame to the ceiling plane so it stays airtight through the temperature swings. Original Boulder City hatches were built with neither a gasket nor a latch, and the dry desert heat plus a 150°F attic warps them until they sit unevenly. The fix is a new cover, not just weatherstripping. Most hatch jobs run $250 to $500 and come with a written price before work starts. Call (844) 320-7926 for an exact quote – estimates are free.
Owens Corning, Johns Manville, Knauf, and Rockwool cover most of the insulation on Boulder City jobs, with GreenFiber for blown-in and Icynene or Demilec for foam where it’s specified. Sealants and foams are fire-rated and matched to the penetration rather than a one-product rule. No proprietary lock-in means the spec follows the house. Call (844) 320-7926 for an exact quote – estimates are free.
Call (844) 320-7926 for a free estimate. A live person answers 24/7. You’ll get a written price before any work starts, a free second opinion if you’ve got a competing estimate, a Documented Photo Record on the visit, and on applicable jobs the before-and-after blower-door numbers so you can see the difference you paid for. If it’s not done right, the 365-Day Done Right Promise makes it right.
Written by the team at Envelope Insulation Boulder City.