A Topside company - serving Boulder City, NV

Blown-In Attic Insulation in Boulder City, NV

Blown-In Attic Insulation in Boulder City, NV

Blown-in attic insulation is loose fiberglass or cellulose that we blow across your attic floor to a measured depth, filling the gaps between joists that batt insulation can’t reach. In Boulder City, most single-story homes built in the 1970s through 1990s have settled to 4 or 5 inches of old material when they should be at 12 to 14 inches for our climate zone. We do this work at Envelope Insulation Boulder City with one hard rule: we seal the attic floor first, then insulate. Never the other way around. Call (844) 320-7926 for a free estimate and a written price before anything starts.

This page covers the blown-in work specifically. For the full range of what we do up there, including removal, radiant barrier and rodent proofing, see our Attic Insulation in Boulder City service page. Blown-in is the workhorse of the lineup, and it’s usually the single biggest improvement a Boulder City homeowner can make per dollar spent.

Key Takeaways

  • Blown-in insulation only performs as designed when the attic floor is air sealed first. We don’t skip that step.
  • Most Boulder City attic jobs land between $1,400 and $2,900 depending on square footage, existing insulation, and whether removal is needed.
  • Every applicable job includes before-and-after blower-door readings so you can see the actual air loss change in one number.
  • You get a written price, written scope, and written warranty before anyone lifts a tool. Under the Haven Standard, that’s Clause 1, not a courtesy.

When You Need Blown-In Attic Insulation

professional attic insulation service
When You Need Blown-In Attic Insulation

Insulation doesn’t fail all at once. It settles, compresses, and loses R-value year by year, and in the Mojave summer heat that decline shows up on your power bill before it shows up in the attic. Here’s what tells us a Boulder City home is due.

  • Your attic insulation is below 10 inches deep. Take a tape measure up there. If you can see the tops of the joists, you’re under-insulated for Boulder City’s climate. Most homes with original 1980s insulation are sitting at 4 to 6 inches.
  • Your second-floor rooms run 8 to 12 degrees hotter than the first floor in July. That gap is heat pushing through a thin ceiling assembly. Blown-in to R-38 or better closes it substantially.
  • You can see daylight or feel warm air moving around ceiling penetrations. Can lights, top plates, plumbing chases and wire holes leak air whether or not insulation covers them. That’s exactly why we seal before we blow.
  • Your ducts run through a 140-degree attic. In Boulder City, attic temperatures in summer routinely hit 140 to 150 degrees. Ducts in that space need every inch of insulation you can give them above and below.
  • You’re buying a home built between 2015 and 2025 and the inspection noted low attic R-value. Builder-grade insulation often meets code minimum on paper and comes in under it once it settles. A quick depth measurement settles the question.
  • Your winter gas bills climbed without a rate change. Heat escaping through a leaky, thin ceiling shows up fast in a cold snap. Blown-in attic insulation fixes the ceiling path in one visit.

Our Blown-In Attic Insulation Process

Here’s the sequence we run in a Boulder City attic, and why each step comes in that order.

  1. Attic inspection and depth measurement. We measure existing insulation depth, photograph the joists and penetrations, and check for moisture, rodent activity and duct condition. You see the photos before you see a price.
  2. Air sealing first. We seal top plates, can lights, plumbing and wire penetrations, and the attic-to-house boundary with foam and caulk. This is the step most companies save for last, or skip entirely. We do it first because insulation blown over an unsealed floor only filters air, it doesn’t stop it.
  3. Blower-door test. A blower-door test is a pressurization reading that shows, in one number, how much air your building envelope is losing. We take a baseline reading before we seal and a second reading after, so the improvement is documented in numbers, not adjectives.
  4. Blown-in insulation to target R-value. We blow fiberglass or cellulose across the attic floor to a measured depth that hits your target R-value, then mark the depth gauges so anyone can verify it later. We source from Owens Corning, Johns Manville and Knauf, so you’re never locked into one proprietary product.
  5. Ductwork and attic hatch attention. Ducts get insulated or re-supported where needed, and the attic hatch gets a weatherstripped cover. These are the details that quietly undo a good blow-in job if they’re missed.
  6. Final walkthrough and documented record. You receive your before-and-after blower-door readings, a photo record of the sealed and insulated attic floor, and a written warranty. That’s what leaving looks like on a Haven Standard job.

Blown-In Attic Insulation Pricing in Boulder City

Professional technician installing fiberglass batt insulation in an attic
Blown-In Attic Insulation Pricing in Boulder City

Most blown-in attic insulation jobs in a Boulder City home run between $1,400 and $2,900, and that range includes air sealing. The low end is a smaller home with existing insulation in decent shape and no removal. The high end is a larger attic, old failing insulation that needs to come out, or extensive air sealing around recessed lights and complex framing. Here’s how the line items break down.

Line item Typical range
Air sealing (top plates, can lights, penetrations) $400 – $900
Blown-in insulation, R-38 to R-49, per square foot $1.50 – $3.50 / sq ft
Insulation removal (if old material is wet, rodent-contaminated or compressed) $600 – $1,800
Duct insulation repair or re-support $250 – $700
Attic hatch cover and weatherstripping $150 – $300
Blower-door test (included on applicable jobs) Included

What affects the number most: attic square footage, whether removal is required, how many penetrations need sealing, and whether ducts need work. Our written price before any work starts is flat and fixed, not an estimate that grows. Under the Haven Standard, you get a written scope and written warranty before anyone lifts a tool, and a Free Second Opinion on any competing written estimate you bring us. If you’ve already got a quote in hand, we’ll read it with you.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Why We Seal Before We Blow

Blown-in insulation is only as good as the air boundary beneath it. An attic floor with unsealed can lights and top plates leaks air constantly, and insulation laid over those leaks gets used as a filter. The warm air still escapes, just more slowly, and you’ve paid for insulation that isn’t doing its full job. Our technicians have up to 10 years of experience and every one of them seals before they blow, no exceptions. That’s the difference between the written promise and the actual job, and it’s why we publish blower-door readings on every applicable job instead of describing performance in general terms. We’ve sealed and insulated 9,000+ homes since 2016, and every one closed with a documented photo record, a written price, and a written warranty.

How Blown-In Insulation Holds Up in Boulder City’s Climate

Contractor installing fiberglass batt insulation in a residential attic
How Blown-In Insulation Holds Up in Boulder City’s Climate

Boulder City sits at roughly 2,400 feet in the Mojave, with summer attic temperatures that routinely exceed 140 degrees and winter nights that drop into the 30s. That swing is hard on insulation. Fiberglass and cellulose both settle over time, and in a hot, dry climate the settling is faster than in a cooler, humid one. A blow-in job done at the right depth and density with proper air sealing holds its R-value longer than a bag-and-batt job ever will. If we ever find settled insulation below spec during a Home Energy Audit, we’ll tell you and show you the depth gauge photo.

FAQs – Blown-In Attic Insulation

How much does blown-in attic insulation cost in Boulder City?

Most blown-in attic insulation jobs in Boulder City cost between $1,400 and $2,900, including air sealing. That figure covers the full scope: sealing penetrations, blown-in insulation to target depth, and a blower-door reading. Call (844) 320-7926 for a written price on your specific attic. Estimates are free and up front.

Can you insulate my attic the same day?

Most standard blown-in attic jobs are completed in a single day, typically 3 to 6 hours for an average Boulder City home. Larger attics or jobs that require removal of old material can run into a second day. We give you the schedule before we start, and under the Haven Standard you get a text when your technician is on the way. Call (844) 320-7926 to check availability.

Do you have to remove the old insulation first?

No, in most cases we can blow new insulation over existing material if it’s dry, clean and at a stable depth. We recommend removal when the old insulation is damp, compressed below 4 inches, or contaminated with rodent droppings or nesting material. Our inspection determines which applies, and we’ll show you the photos. Call (844) 320-7926 for an inspection and a written scope.

Why do you run a blower-door test on a blown-in job?

A blower-door test gives us a baseline reading of how much air your home is losing before we seal, and a second reading after the work is complete. The change between the two numbers is proof of the air-sealing result you paid for. We provide those readings on every applicable job. Call (844) 320-7926 to set up an inspection and see what a blower-door test shows for your home.

Does blown-in insulation qualify for any rebates in Boulder City?

In many cases yes, though program details change and we don’t want to quote a number we can’t verify for your address. We’ll walk you through what applies to your home during the estimate. Call (844) 320-7926 to get your written price and rebate details.

When you’re ready to stop paying for heat you don’t get to keep, call (844) 320-7926 for a free estimate. You’ll get a written price before any work starts, a written scope, and a written warranty, backed by our 365-Day Done Right Promise and a Documented Photo Record on every visit. Explore our full Attic Insulation in Boulder City services or start on our home page.

Written by the team at Envelope Insulation Boulder City, serving Boulder City.

Need Insulation help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7926
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Envelope Insulation Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch