CertainTeed Home Energy Audit in Boulder City: What to Know First
A CertainTeed home energy audit in Boulder City typically runs $350 to $650 for a full blower-door and thermal-imaging assessment, and most are scheduled within 3 to 5 business days of your call. We’re an independent CertainTeed service provider, not affiliated with or authorized by the manufacturer, and we give you a written price before any work starts.
This page is for Boulder City homeowners who already have CertainTeed insulation or envelope products in the house and want to know what’s actually performing and what isn’t. If that’s you, call (844) 320-7926 and a live person will pick up, day or night.
Key Takeaways
- Full CertainTeed performance audits in Boulder City run $350 – $650, with a written scope delivered before testing begins.
- We publish before-and-after blower-door numbers on every applicable job, so you see the CFM50 change in a single figure.
- CertainTeed fiberglass batts and blown fiberglass fail differently than spray foam or cellulose, and our techs test for those specific failure patterns.
- Reflectix radiant barriers also show up in Boulder City attics, and we audit those accurately alongside CertainTeed products.
- Under the Haven Standard, you get a Documented Photo Record and a 365-Day Done Right Promise on every completed audit and repair.
How CertainTeed Products Fail – and How We Fix Them
CertainTeed makes solid envelope materials, but how those materials are installed and how Boulder City’s desert heat treats them 15 to 30 years after installation creates predictable failure patterns. Here are the ones we see most on Boulder City CertainTeed audits.
- CertainTeed fiberglass batts compressing under settled weight. In Boulder City attics that routinely hit 145°F in summer, CertainTeed fiberglass batts lose R-value as they settle and sag between joists. The symptom is a sagging batt at the top of the stack with a gap at the joist bay below. We measure R-value at the top plate and mid-bay, not just visually inspect.
- CertainTeed blown fiberglass blown over air leaks, not under them. A very common finding in Boulder City homes from the 2000s-2010s build cycle: CertainTeed blown fiberglass was installed directly over can lights and top plates without primary air sealing. The insulation looks fine. The blower door reads 3,800 CFM50. Air sealing has to happen first, then insulation goes back in.
- CertainTeed MemBrain vapor retarder losing continuity at penetrations. MemBrain is a smart vapor retarder that needs continuous taping at seams and penetrations; in Boulder City’s dry climate, the failure isn’t typically moisture damage – it’s the tape lifting at recessed can light penetrations and wall outlets, which opens an air path you can’t see from the attic side.
- CertainTeed Sustainable Insulation batts in knee walls with no rigid backing. Knee-wall installs without a rigid air barrier behind the batts allow convective loops through the stack. In Boulder City this shows up on thermal imaging as a cold stripe at the knee wall during a winter morning audit. The fix is a rigid foam backing behind the batt, not more insulation.
- CertainTeed fiberglass batts with no duct-sealing on the equipment side. Attic ducts running through a hot Boulder City attic with CertainTeed batt-wrapped duct runs and no mastic at the boot connections commonly leak 15 – 25% of the air the system moves. Duct leakage testing at 25 Pa quantifies it; we mastic-seal boots and seams before pulling new insulation over the ducts.
Notice one pattern: none of these are CertainTeed material defects. They’re installation sequencing or air-sealing failures. That’s why we seal first, then insulate, in that order, on every job. We never blow insulation over an unsealed attic floor.
Our CertainTeed Home Energy Audit Process

- 1
Written price before any test. Haven Standard Clause 1: flat price, written scope, written warranty before anyone lifts a tool. You know the number for the CertainTeed audit before we arrive.
- 2
Blower-door test and thermal imaging. A blower-door test is a pressurization reading that shows, in a single figure, how much air your building envelope is losing; combined with thermal imaging at Boulder City’s large outdoor-to-indoor temperature differential, we locate the specific leak paths and insulation gaps.
- 3
Duct leakage test. A 25 Pa duct pressurization test quantifies what percentage of conditioned air is leaking out of attic duct runs. This is where a lot of CertainTeed batt-wrapped duct systems surprise their owners.
- 4
Diagnosis and written repair scope. We hand you the CFM50 reading, the thermal images, the duct leakage percentage, and a written scope for air sealing and insulation repair with parts decisions (CertainTeed replacement batts vs. blown-in fiberglass vs. spray foam at penetrations) explained in the quote.
- 5
Work performed and post-test. Air sealing first, then insulation. Post-repair blower-door test produces the “after” number. Both numbers go in writing in the Documented Photo Record.
- 6
Walkthrough and warranty. We walk the work, hand you the photos and the readings, and apply the 365-Day Done Right Promise. If the CFM50 didn’t drop as scoped, we come back and make it right.
What CertainTeed Home Energy Audit Costs in Boulder City
Boulder City pricing is a little higher than Clark County averages because the driving distances are longer and the summer attic work windows are tighter – crews usually start before 7 a.m. to keep attic temperatures workable. Here are the ranges we see most often:
| Job | Typical Range in Boulder City |
|---|---|
| Full CertainTeed home energy audit (blower door + thermal imaging + duct leakage test) | $350 – $650 |
| Blower-door test alone (verification, pre/post) | $250 – $400 |
| Duct leakage test only | $185 – $320 |
| Air sealing of attic floor (top plates, can lights, penetrations) – prerequisite for any re-insulation | $1,200 – $2,800 |
| CertainTeed fiberglass batt or blown-in replacement in an attic after sealing | $2,400 – $6,200, depending on square footage and R-value target |
| Knee-wall rigid backing + CertainTeed batt re-install (per knee wall) | $425 – $850 |
What moves the price: attic square footage, how many leak paths the blower door and thermal imaging actually find, whether duct runs need mastic sealing on top of a certainTeed repair, and whether we’re pulling out old batts or resecuring what’s there. We give you a written price before any work starts, plus a Free Second Opinion on any competing estimate you bring in – we’ll read it with you.
Why Boulder City Homeowners Call Envelope Insulation Boulder City for CertainTeed Work

We’ve sealed and insulated more than 9,000 homes since 2016, and every one closed with a written price and a Documented Photo Record. Our technicians have up to 10 years of experience reading blower-door numbers and thermal images, and we treat CertainTeed as one of the materials we work with routinely – alongside Owens Corning, Johns Manville, Knauf, Rockwool, Icynene, Demilec, and GreenFiber. No proprietary product lock-in, which means the CertainTeed recommendation you get from us is because it’s the right fit for the job, not because we’re tied to the brand. Reflectix radiant barriers in Boulder City attics also get audited and addressed correctly. Background-checked, uniformed technicians, a text when they’re on the way, live person answering the phone 24/7. That’s the Haven Standard.
Frequently Asked Questions
An audit that inspects and tests is not a warranty event and does not void a CertainTeed material warranty on its own. What can matter is what you do afterward – improper installation of replacement CertainTeed product or covering existing product in ways that deviate from CertainTeed’s published installation instructions. Our written scope names the CertainTeed product lines we’re using and follows installation instructions, so the warranty position stays clean.
We source CertainTeed materials through distributor channels and schedule deliveries to your job based on the written scope. For a standard Boulder City attic re-insulation, material lead times are typically 3 to 7 business days. If you need an urgent repair, we’ll tell you on the phone what’s realistic.
In most Boulder City homes we audit, repair plus air sealing is cheaper than full replacement – especially if the CertainTeed batts are still dry and intact and the real problem was air leaks, not material. Replacement becomes the right answer when batts are compressed below usable R-value, wet from a roof leak, or contaminated. The blower-door and thermal imaging results tell us which one you’re actually facing before we quote.
Most CertainTeed home energy audits in Boulder City are scheduled within 3 to 5 business days, and a live person answers 24/7 to get you on the calendar. Call (844) 320-7926 for an exact slot.
Yes. Several Boulder City attics have CertainTeed insulation in the floor and Reflectix radiant barrier on the roof deck, and one audit can test and report on both. Blower-door testing at pressure does not compromise a properly installed radiant barrier, and we document the condition of both before recommending any change.
If you have a CertainTeed envelope in a Boulder City home and you’re not sure the numbers add up to what you paid for, let’s find out. Call (844) 320-7926 for a free estimate on a CertainTeed home energy audit in Boulder City – written price before any test, Documented Photo Record whether you hire us or not, 365-Day Done Right Promise if you do. A live person takes the call.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.