Demilec Attic Air Sealing: The Boulder City Owner’s Guide
Demilec attic air sealing in Boulder City typically runs $1,100 to $3,400 installed, depending on attic square footage, how many top plates, can lights, and penetrations need sealing, and whether a blower-door test is included before and after. Most homes are sealed in a single day. We install Demilec-compatible air sealing systems across Boulder City, and our technicians have up to 10 years of experience working with spray foam and sealant specification.
Owners usually find out the Demilec air seal has failed the same way we do: a utility bill that climbed $80 to $140 a month without explanation, dust along the attic hatch, or a blower-door test that reads far higher than it should. Sometimes it’s colder ceilings in winter, or that faint musty smell that shows up in the hallway after a windy week. The Demilec name on the label becomes important when you need a replacement that actually matches the original spec, because the wrong sealant chemistry on a foamed attic floor can mean a second tear-out, not a fix.
Which Demilec Models This Applies To
Demilec air sealing products used in Nevada attics fall into a few recognizable families. The low-pressure two-component spray foams (Soya-based and Heatlok lines) and the one-component foam sealants behave differently, and the can or pail label always carries a series number and a batch code. Look for the product name, the series, and the batch date printed on the side of the container or stamped on the drum lid; photograph all three before you call anyone. That photo is what lets us match your existing material rather than guess.
Demilec was acquired by Huntsman and later absorbed into the Holcim building envelope business, so the same formulation may ship under a different brand label on the shelf. That’s a compatibility gotcha worth knowing: a “Demilec” replacement can arrive under the Holcim name with the same series number, and it’s still the right part. OEM cans match your original spec exactly; quality aftermarket equivalents exist for standard penetrations but not for the specific two-component attic systems. We’re an independent service provider, not affiliated with Demilec, and we source from Demilec and other industry suppliers based on what your attic actually needs, not on what a single manufacturer wants to sell.
Signs Your Demilec Attic Air Sealing Is Failing

These five symptoms come up repeatedly in Boulder City homes:
- Rising energy bills with no usage change. The seal has cracked or shrunk away from a top plate, so conditioned air leaks into the attic and the HVAC system works harder to hold temperature.
- Visible cracks, gaps, or peeling at spray-foam edges. UV exposure, summer attic heat (Boulder City attics routinely hit 140°F and above), and the expansion-contraction cycle from desert nights down to 40°F push sealant away from framing. That’s the failure mode, not a cosmetic issue.
- Drafts at ceiling penetrations and can lights. A failed bead around a recessed light or plumbing stack lets air move freely. You’ll feel it on a windy day from below.
- Dust streaks or staining on attic sheathing. Air moving through an unsealed penetration carries dust and moisture with it. Streaks are the record of that leak.
- Blower-door readings that climb between visits. If a prior test read 3,800 CFM50 and a follow-up reads 4,600, the seal has degraded. A blower-door test is a pressurization reading that shows, in one number, how much air your building envelope is losing.
Replacement Cost & What’s Included
Installed Demilec-compatible attic air sealing in Boulder City breaks down roughly like this:
- Top plates, framing penetrations, and plumbing/electrical chases: $650-$1,400
- Recessed can lights (with fire-rated covers where required): $180-$520 depending on count
- Attic hatch and pull-down stair sealing: $120-$280
- Before-and-after blower-door testing: $250-$450
- Bath fan and dryer vent dampers: $80-$200
The total range is $1,100 to $3,400. What drives it: attic square footage, penetration count, whether the existing foam must be removed first (rare but real), and whether a blower-door test was already done. Parts and labor are priced separately on your written scope, so you can see what the material costs and what the work costs. Every job carries our 365-Day Done Right Promise, and we publish before-and-after blower-door numbers so you can see the change you paid for.
DIY or Call Us?

An owner can safely inspect without ever climbing into the attic: check the ceiling for dust streaks, note where can lights sit, and read your utility bills for a step change. Photograph the product label if you can see it. Do not spray two-component foam yourself in a closed attic. The components are isocyanate-based, the fumes require an organic-vapor respirator and good ventilation, and one mis-mixed batch can leave you with foam that never cures and a much larger removal bill. Spray foam is reactive chemistry, not caulk. Under Haven Standard Clause 1, we give you a written price before any work starts, so there’s no reason to guess at the number or the risk.
FAQs
Expect 10 to 15 years for a well-applied two-component foam seal in Boulder City’s climate, sometimes longer, but the desert heat-and-cooling cycle shortens that. Attic temperatures that swing from 140°F in July down to 40°F at night in winter stress the seal at every edge. Have it re-inspected at year 8. Call (844) 320-7926 for a free estimate on inspection and re-sealing.
Often yes. If the foam has failed at isolated penetrations but held at the top plates, spot repair is far cheaper than a full re-seal. We’ll tell you which you need after a blower-door test and attic walk. Call (844) 320-7926; estimates are free.
Most Boulder City attic air sealing jobs are completed in one day, typically 4 to 7 hours on site, plus blower-door testing before and after. Larger attics with heavy penetration counts may run a second half-day. Call (844) 320-7926 to schedule.
We match your existing series and formulation by photographing the label and cross-referencing against current Demilec/Holcim supply, then source from distributors who stock it. Because we’re independent, we can substitute an equivalent if the exact spec is unavailable. Call (844) 320-7926 for a written scope and price before work begins.
If your Demilec air seal in Boulder City has cracked, pulled away, or stopped holding, the honest next step is a blower-door test and a written price. Call Envelope Insulation Boulder City at (844) 320-7926 for a free estimate on Demilec-compatible attic air sealing, and we’ll bring the photos, the readings, and the scope in writing. We also service Reflectix radiant barrier systems and the rest of the building envelope if the inspection turns up more. Live person answers calls 24/7.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.