A Topside company - serving Boulder City, NV

Demilec Attic Cleaning & Rodent Proofing in Boulder City, NV

Demilec Attic Cleaning & Rodent Proofing in Boulder City: What to Know First

We provide independent Demilec attic cleaning and rodent proofing in Boulder City, and most jobs run one to two days from the first call to the final photo record. You get a written price before any work starts, and we don’t sell a cleanout until we’ve confirmed what’s actually nesting in the insulation. As an independent Demilec service provider, we are not affiliated with or authorized by Demilec, but our technicians have up to 10 years of experience working with the brand’s spray foam and injection products in Boulder City attics.

Call (844) 320-7926

This page is for owners of homes with Demilec spray foam or injection foam in the attic, crawl space, or rim joist area who are hearing scratching at night, finding droppings, or dealing with foam that’s been tunneled through. Call (844) 320-7926 and a live person answers, day or night. We’ll talk through what you’re seeing before we schedule anything.

Key Takeaways

  • Rodents don’t eat closed-cell Demilec foam – they chew channels through it to reach warmth and nesting voids, and the damage rarely stops at the surface.
  • Attic cleanout, sanitizing, and exclusion in Boulder City typically run $1,400 to $4,800 depending on square footage and the extent of foam damage.
  • Every job starts with a written price and a written scope. No work begins without both.
  • We publish before-and-after blower-door numbers where air sealing applies, so you can see the measured change, not just take our word for it.

How Demilec Products Fail – and How We Fix Them

Demilec makes several foam families that show up in Boulder City homes, and each one fails differently once rodents get into an attic. Here’s what our technicians actually find.

  • Heatlok HFO and Heatlok Soy 200 closed-cell foam: Rodents can’t digest the cured foam, but they will chew horizontal tunnels through it to travel between joist bays. The tunnels usually start at the perimeter where the foam meets the top plate – the gap rodents exploit first. We map the tunnel network with a moisture meter and a bore scope, then cut out the damaged sections and re-foam to full depth. Leaving a hollow tunnel behind invites the same colony back within a season.
  • SealTite 500 and SealTite Pro injection foam: This two-component foam is common in finished walls and rim joists. When rodents occupy a cavity behind it, the foam cracks along its bond line to the framing rather than through its center. That crack looks minor but breaks the air seal entirely. We identify it by probing the bond line and looking for a hollow sound, then remove and re-inject the section.
  • Demilec Soya and Sucraseal open-cell foam: Open-cell foam is soft and porous, and rodents shred it readily. Contaminated open-cell foam cannot be cleaned – it has to be removed. We cut it out with a foam saw, bag it, and replace it after exclusion and sanitation are complete.
  • Foam applied over old fiberglass: We regularly find Demilec foam sprayed directly over batts that were already contaminated. The foam looks intact on the surface, but underneath, the fiberglass is a rodent nursery. We separate the layers, remove both, and start with a clean, sealed attic floor. This is the most common call we get in Boulder City’s older tracts, where the original insulation was left in place.
  • Foam around penetrations and can lights: Where the foam meets a recessed can light or a plumbing stack, the bond is often thin and prone to cracking. Rodents find these seams and follow the pipes down into wall cavities. We seal the penetrations before any insulation goes back in – always in that order.

None of these failures are Demilec-specific in the sense that the foam is defective. Cured polyurethane foam is a good product. The problem is what happens when a rodent colony moves into an attic that was never properly excluded in the first place. Fix the entry points, remove the contamination, sanitize, replace the damaged foam, and the attic stays clean.

Our Demilec Attic Cleaning & Rodent Proofing Process

professional attic insulation service
Our Demilec Attic Cleaning & Rodent Proofing Process

Here’s what a Demilec job looks like from your first call to the day we hand you the photo record.

  1. 1
    Assessment and written scope. We inspect the attic, crawl space, and rim joist, and identify entry points, contaminated areas, and damaged foam. You get a written price and a written scope before anyone lifts a tool – that’s Haven Standard Clause 1.
  2. 2
    Exclusion first. We seal entry points with hardware cloth, copper mesh, and foam-compatible sealant. No trapping without exclusion – it just moves the problem.
  3. 3
    Removal. Contaminated insulation and damaged Demilec foam come out and go into sealed bags. We don’t blow new insulation over anything we haven’t inspected and sealed.
  4. 4
    Sanitizing and decontamination. Attic surfaces are HEPA-vacuumed and treated with an antimicrobial application. Droppings, urine, and nesting material are removed, not covered.
  5. 5
    Repair and re-foam. We replace the removed Demilec foam with the same product family where it’s available, or a compatible alternative if lead time is an issue. Materials come from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber.
  6. 6
    Air sealing and verification. Top plates, penetrations, and can lights are sealed before any new insulation goes down. On applicable jobs, we run a blower-door test before and after so you have a number that shows what changed.

Every job closes with a Documented Photo Record – the before and after shots of the entry points, the removed foam, the sealed attic floor, and the final install. You get it whether you ask or not.

What Demilec Attic Cleaning & Rodent Proofing Costs in Boulder City

Most Demilec attic cleanout and rodent proofing jobs in Boulder City fall between $1,400 and $4,800. Here’s roughly how the line items break down.

Scenario Typical range
Inspection, written scope, and exclusion only $350 – $850
Attic cleanout with HEPA vacuum and sanitizing (up to 1,200 sq ft) $1,200 – $2,400
Cleanout plus localized Demilec foam removal and re-foam $2,200 – $3,800
Full attic restoration: removal, sanitizing, exclusion, air sealing, new insulation $3,400 – $4,800
Blower-door verification on applicable jobs Included

What moves the price: attic square footage, how much foam needs to come out, whether the foam was sprayed over old fiberglass, how many entry points we find, and whether the crawl space or rim joist is also involved. A written price is required before any work starts – so you’ll have the exact number on paper before we schedule. We also offer a free second opinion on any written estimate you bring us; we’ll read it with you and point out what’s in scope and what isn’t.

Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

Professional technician installing fiberglass batt insulation in an attic
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

We do one thing and do it to a documented standard. Under Haven Standard: Arrive on schedule, you get a named technician and a text when they are on the way. Calls are answered by a live person, 24/7 – no voicemail loops, no callback windows measured in business days. Our technicians have up to 10 years of experience and are background-checked and uniformed.

The 365-Day Done Right Promise applies to all completed work: if it’s not done right, we make it right. That’s backed by a written scope and written warranty delivered before anyone starts. Since 2016, we’ve sealed and insulated 9,000+ homes, every one with a written price before work started and a documented record when the crew left.

If your home also has Reflectix radiant barrier in the attic, we handle that too – we source materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, and we don’t lock you into a single brand. On jobs where we air seal, you get the before-and-after blower-door numbers to verify what changed. On any written estimate you bring us, the second opinion is free.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Insulation help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 320-7926
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Envelope Insulation Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch