Demilec Crawl Space Encapsulation & Vapor Barrier in Boulder City: What to Know First
We provide independent Demilec crawl space encapsulation and vapor barrier service in Boulder City, and most residential jobs here are completed in one to two days once the encapsulation is scheduled. A 20-mil vapor barrier liner with taped seams and a sealed perimeter typically runs $2,400 – $4,800 for a standard Boulder City crawl space; full encapsulation with rigid foam board on the walls runs $4,500 – $9,500 depending on square footage and existing moisture damage. We’re not affiliated with Demilec – we’re an independent Demilec service provider – and we put the price in writing before any work starts.
This page is for Boulder City homeowners who own a home insulated or sealed with a Demilec product and now need crawl space encapsulation, a vapor barrier, moisture control, or a full crawl space cleanout. Call (844) 320-7926 for a free estimate and we’ll walk the crawl space with you.
How Demilec Products Fail – and How We Fix Them
Demilec makes a range of spray foam and sealant products, and in Boulder City’s crawl spaces we see a consistent set of failure modes that show up differently than they do in other brands. Here’s what we find and how we handle each one.
- HeatMaxx and Sealection 500 closed-cell foam pulling away from rim joists. In Boulder City crawl spaces, the daily temperature swings between the cool earth floor and the sun-baked rim board cause the foam to shear along the wood-to-masonry joint over time. We see this most on the north-facing rim where moisture migrates first. Our fix: cut back the failed section, re-foam with a fresh Demilec pour, and mechanically fasten a vapor barrier termination strip over the joint so the foam isn’t carrying the load alone.
- Sealection 500 off-gassing and lingering odor after application. A cured Demilec foam shouldn’t smell. When a homeowner reports a persistent chemical odor weeks after install, the cause is almost always a mis-mixed ratio during application, not a product defect. We pull a core sample, verify density, and if the foam is off-spec we remove it and re-apply in our own controlled pour.
- Heatlok HFO foam shrinking away from floor joists. This open-cell-family foam is more susceptible to shrinkage in low-humidity crawl spaces, and Boulder City’s dry air accelerates the process. The foam shrinks back from the joist bay, leaving an air channel that defeats the vapor barrier. We re-insulate the affected bays and add a dedicated vapor barrier below so the foam isn’t the primary moisture control.
- Demilec sealant cracking at foundation penetrations. The sealant Demilec supplies for pipe and conduit penetrations is a good product, but it’s specced for interior conditioned space, not a crawl space that sees seasonal ground moisture. We re-seal these penetrations with a flexible elastomeric boot and tie it into the new vapor barrier membrane so the crack can’t propagate back into the foam line.
- Foam installed over an unsealed or wet substrate. This is the failure we see most, and it’s an install error, not a Demilec problem. Foam blown over a dirt floor or a damp masonry wall traps moisture under the foam, which then wicks into the joists. We remove the compromised foam, dry the substrate, install the vapor barrier first, and only then re-insulate.
Our Demilec Crawl Space Encapsulation & Vapor Barrier Process

Every Demilec job follows the same sequence – sealed first, then insulated, in that order. Here’s what a job looks like from your call to cleanup.
- 1
Site walk and moisture reading. We measure relative humidity at the floor, the rim, and the joist bays, and photograph the existing Demilec coverage. We identify where the foam has failed and where the vapor barrier needs to go.
- 2
Written price before any work starts. Under Haven Standard Clause 1, you get a flat price, written scope, and written warranty in hand before we lift a tool. No surprises.
- 3
Demo and cleanout. Failed Demilec foam, old batts, and debris come out. We haul it off and document the bare substrate with photos.
- 4
Vapor barrier and air sealing. We install the 20-mil liner, tape all seams, seal the perimeter, and air-seal penetrations at the rim and foundation wall. This is the part most Demilec jobs skip – and it’s the part that makes the foam last.
- 5
Re-insulation and verification. We re-apply Demilec foam where specified, then take a moisture reading and photograph the finished assembly. On applicable jobs, we run a blower-door test before and after and publish both numbers.
- 6
365-Day Done Right Promise. If anything in the scope isn’t right within a year, we come back and make it right.
What Demilec Crawl Space Encapsulation & Vapor Barrier Costs in Boulder City
Prices below reflect what Demilec crawl space work actually costs in the Boulder City market. Every job gets a written price before work starts.
| Scope | Typical Boulder City Range |
|---|---|
| Crawl space vapor barrier only (20-mil, taped seams) | $2,400 – $4,800 |
| Full encapsulation (liner + wall foam board + sealing) | $4,500 – $9,500 |
| Crawl space cleanout and debris removal | $650 – $1,800 |
| Demilec foam repair or re-application (partial bay) | $900 – $2,600 |
| Moisture remediation before encapsulation | $1,200 – $3,500 |
What moves the price most: square footage, the amount of failed Demilec foam that has to come out, and whether active moisture intrusion needs to be corrected before the barrier goes down. A crawl space with active seepage always costs more than a dry one – we won’t encapsulate over water.
Call (844) 320-7926 for a free estimate, and we’ll bring the written price to you. If you have a competing estimate, we’ll read it with you as a free second opinion.
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

We’ve completed 9,000+ homes since 2016, every one with a written price before work started and a Documented Photo Record when the crew left. Our technicians have up to 10 years of experience and know Demilec foam inside and out – we’ve pulled enough failed HeatMaxx and Heatlok out of Boulder City crawl spaces to know what a bad pour looks like versus a product defect.
We’re not locked into Demilec. We source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so if your crawl space needs a different brand or a hybrid assembly, we’ll tell you. We also service Reflectix radiant barriers if your crawl space has one. Every job ends with the 365-Day Done Right Promise and a documented record – photos, readings, and a written scope you keep.
Live person answers the phone 24/7. No voicemail loops. Background-checked, uniformed technicians with a text when they’re on the way.
FAQs
Is Demilec crawl space foam covered by a warranty after encapsulation? Demilec’s manufacturer warranty covers the foam product itself, but it doesn’t cover installation failure or moisture damage from an unsealed substrate. Our 365-Day Done Right Promise covers the workmanship on top of that. Call (844) 320-7926 and we’ll walk you through both in writing.
Can you source Demilec replacement parts for a Boulder City crawl space? Yes – we stock and source Demilec foam, sealant, and compatible vapor barrier components, and we can also match non-Demilec compatible brands if the original product is discontinued. Call (844) 320-7926 with your product name and we’ll confirm availability.
Is it cheaper to repair the Demilec foam or re-encapsulate the crawl space? Repair is cheaper when the foam failure is limited to one or two bays and the existing vapor barrier is intact – that’s typically the $900 – $2,600 range. If the vapor barrier is missing or compromised across more than a third of the crawl space, re-encapsulation usually costs less over five years because you’re not paying twice. Call (844) 320-7926 for a free second opinion on which way to go.
How fast can you come out for a Demilec crawl space job in Boulder City? Most estimates are scheduled within a few business days, and encapsulation work is typically completed in one to two days once scheduled. Call (844) 320-7926 and we’ll give you a real window.
Do you publish before-and-after blower-door numbers on Demilec encapsulation jobs? Yes – on applicable jobs we run a blower-door test before and after the work and give you both numbers. The reading is a pressurization measurement that shows, in one figure, how much air your home was losing before and after the encapsulation. Not every crawl space encapsulation warrants a blower-door test, and we’ll tell you honestly if yours does.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.
Get a Written Price on Your Demilec Crawl Space Job

Call (844) 320-7926 for a free estimate on Demilec crawl space encapsulation, vapor barrier, or cleanout in Boulder City. You’ll get a flat price, a written scope, and a written warranty before any work starts – Haven Standard Clause 1, every job, no exceptions. If you have a competing estimate, bring it. We’ll read it with you.