A Topside company - serving Boulder City, NV

Demilec Insulation Removal & Replacement in Boulder City, NV

Demilec Insulation Removal & Replacement in Boulder City: What to Know First

Most Demilec insulation removal and replacement jobs in Boulder City run one to two days, depending on attic size and how much old material has to come out. We give you a written price before any work starts, and on jobs where the envelope leaks, we publish before-and-after blower-door numbers so you can see the change in one figure. If you’re dealing with a Demilec spray foam or injection product that’s failed, this page is for you. Call (844) 320-7926 for a free estimate.

Call (844) 320-7926

Key Takeaways

  • Demilec makes several product families – spray foam, injection foam, and pour-in formulas – and each fails differently.
  • We remove the old material, seal the air leaks underneath, then replace it. In that order, always.
  • You get a written scope, a written warranty, and a photo record before we leave.

How Demilec Products Fail – and How We Fix Them

Demilec (the brand is now part of the Huntsman building solutions line, though most homeowners still search “Demilec”) covers spray foam systems like Sealection 500 and Heatlok, injection foams such as the Demilec injection line for wall cavities, and pour-in or slow-rise formulas used in older construction. In Boulder City’s dry desert climate, the failure modes cluster around heat cycling, UV exposure during installation, and moisture migration from crawl spaces or flat roofs. Here are the patterns our technicians see most.

  • Shrinkage and pull-away in older Sealection 500 jobs. Over 8-12 years, some low-density foam pulls back from stud faces, leaving gaps that let hot attic air in. The foam looks intact from a distance but the bond to wood has failed. We remove the loose sections, seal the top plates and can lights beneath, then re-foam with a current-generation product.
  • Off-ratio or “gluey” foam from a bad mix. When the A and B components are off-ratio during application, the foam cures tacky, sticky, or crumbly. In Boulder City attics that hit 145°F in summer, the off-ratio sections want to delaminate. Testing for tackiness is one of the first checks we do. We remove the whole affected run, not just the surface, because the failure goes through the depth.
  • Injection foam that shrank away from sheathing. In wall cavities, Demilec injection foam can cure with voids if the cavity was wet or cold during install. You get air pockets where you expected insulation. We remove the material from the affected cavity, verify the sheathing is dry, and re-inject or switch to a different wall assembly approach.
  • Foam over wet roof decking or wet top plates. This is the Boulder City monsoon reality – driving rain from the August storms can push moisture into a roof before the foam goes on. Any foam applied over moisture wicks it into the wood, and rot follows. We remove the foam, expose the structural material, document the condition with photos, and confirm it’s dry before any replacement.
  • Foam encapsulation over vermiculite or old blown-in. In some Boulder City homes built before 1990, a prior contractor foamed directly over vermiculite. Vermiculite may contain asbestos, and it needs to be treated and removed by a qualified abatement professional before anyone disturbs it. We stop the diagnosis here and refer appropriately. If you suspect vermiculite, do not open the bag and do not crawl through it.

Our Demilec Insulation Removal & Replacement Process

professional attic insulation service
Our Demilec Insulation Removal & Replacement Process

Every job runs through the same six steps. You’ll know where you are at each one.

  1. 1
    Written price and scope. We inspect the attic, camera the affected areas, and give you a written price before any work starts – Haven Standard Clause 1. You also get a written warranty and a second-opinion offer if you have a competing quote.
  2. 2
    Diagnostics before demolition. We test for tackiness, shrink, and moisture. On jobs where the envelope is involved, we run a blower-door test – a pressurization reading that shows, in one number, how much air your home is losing.
  3. 3
    Targeted removal. We pull the failed Demilec material by the section, not by the whole attic unless it all failed. Debris bags come out, not through your living room.
  4. 4
    Air sealing first. Before any new insulation goes in, we seal top plates, can lights, plumbing chases, and penetrations. This is the part that actually moves the blower-door number.
  5. 5
    Replacement and testing. New spray foam, blown-in, or batt – matched to the assembly and your budget. Blower-door test again. The before-and-after CFM50 readings go on your job record.
  6. 6
    Documented photo record and closeout. Every job ends with photos, the blower-door numbers (where applicable), and the 365-Day Done Right Promise. If it’s not done right, we make it right.

What Demilec Insulation Removal & Replacement Costs in Boulder City

Here’s what we typically see for Boulder City jobs. These are ranges, not quotes – your written price comes after we’ve been in the attic.

  • Spot removal and re-foam in one attic section: $1,100-$2,400.
  • Wall-cavity injection foam removal and re-injection, one wall: $900-$1,800.
  • Full attic Demilec spray foam removal and replacement, 1,200-1,800 sq ft home: $4,200-$7,800.
  • Contaminated material removal (moisture, rodent, or off-ratio) plus full replacement: $5,500-$9,500.
  • Blower-door test before and after, included on applicable jobs: $0 add-on, part of the job.

What moves the price: how much Demilec foam has to come out, whether vermiculite is present (which is a referral, not a job we do), and whether the attic needs a full removal or a targeted one. Under Haven Standard, no work starts before you have a written price. Call (844) 320-7926 for a free estimate.

Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

Professional technician installing fiberglass batt insulation in an attic
Why Boulder City Homeowners Call Envelope Insulation Boulder City for Demilec Work

We’re an independent Demilec service provider – not affiliated with or authorized by Demilec – and we treat that independence as an advantage. No product lock-in. If your failing Demilec job needs Icynene, Owens Corning, or a different system, we quote it honestly. We also service other brands and materials our Boulder City customers ask about, including Reflectix radiant barrier products.

Our technicians have up to 10 years of experience, and they answer the phone – no voicemail loops. Under The Haven Standard, calls get answered by a live person, you get a named technician, and you get a text when the technician is on the way. Before and after blower-door readings on every applicable job. A written price before any work starts. A 365-Day Done Right Promise in writing. That’s what leaving looks like when we’re done.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Does removing Demilec foam void the manufacturer warranty? No, not by itself – the manufacturer warranty is on the foam as installed, and removal only happens when the installation has failed. We’re not authorized by Demilec, so we document the failure thoroughly with photos so you have a record if you pursue a warranty claim. Call (844) 320-7926 for a free second opinion on a Demilec warranty denial.

Can you get Demilec replacement parts or materials in Boulder City? Demilec foam materials are obtainable through distributor channels, and we source from a multi-brand supply chain (Icynene, Owens Corning, Rockwool and others). If a specific Demilec series is unavailable or discontinued, we substitute a compatible system and put that decision in writing before we start. Call (844) 320-7926 to talk through what’s available for your job.

Is it cheaper to repair or replace a failed Demilec spray foam job? A targeted repair is almost always cheaper – $1,100-$2,400 for a spot section versus $4,200-$7,800 for full replacement. But if the failure is off-ratio foam or wetwood underneath, a repair is a temporary fix. The blower-door test tells you which one you’re facing. Call (844) 320-7926 for a free estimate with the honest answer.

How fast can you remove Demilec insulation in Boulder City? Most Demilec removal and replacement jobs take one to two days on site, from arrival to documented closeout. If we need a blower-door test, that adds a walkthrough at the end. We give you the schedule in writing before the crew arrives. Call (844) 320-7926 to get on the schedule.

What if my Boulder City attic has vermiculite under the Demilec? Stop and call a qualified asbestos abatement professional first. Vermiculite may contain asbestos, and no insulation contractor – including us – should disturb it without testing and proper abatement. We’ll tell you during the first inspection and refer you out. Call (844) 320-7926 if you’re not sure what’s under your attic insulation.

If you’re ready for a written price before any work starts, a documented photo record, and blower-door numbers on applicable jobs, call Envelope Insulation Boulder City at (844) 320-7926 for a free estimate.

Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.

Need Insulation help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 320-7926
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Envelope Insulation Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch