Johns Manville Crawl Space Encapsulation: The Boulder City Owner’s Guide
We install Johns Manville-compatible crawl space encapsulation in Boulder City, and most full jobs here run $3,800 to $9,200 depending on square footage, liner thickness, drainage and whether a dehumidifier is part of the scope. A straightforward 20-mil liner on a 1,200-square-foot crawl usually lands near the middle of that range, and we can often begin the same day you call if you’ve already got a failed liner and a wet floor.
The symptom picture is consistent. Owners in Boulder City usually discover their encapsulation has failed not through a visual inspection but through their nose. A musty smell starts in the hallway above the crawl hatch. The bedroom carpet over the access point feels cool and damp on summer mornings. Winter gas bills climb $40 to $90 a month over the prior year, or the HVAC runs noticeably longer to hit setpoint. Sometimes it’s physical: the liner has slipped off the pier and sits in standing water. By that point the encapsulation has been failing for at least a season, sometimes two.
Key Takeaways
- Boulder City crawl space encapsulation rates run $3,800 to $9,200 installed; call (844) 320-7926 for a written price before any work starts.
- Johns Manville encapsulation systems use specific liner gauges and vapor-barrier specs; matching the right series matters when you’re repairing around an existing system.
- Most failures we see in Boulder City trace to insufficient seam tape, unsealed penetrations or a liner installed without drainage relief.
- Our technicians have up to 10 years of experience, and every job finishes with a Documented Photo Record of the crawl space.
Which Johns Manville Models This Applies To
Johns Manville’s crawl space encapsulation products sit within two families: the vapor barrier and liner line (typically 6-mil to 20-mil reinforced polyethylene) and the insulation-facing products that get used over it (foam board, reflective barrier, or a bonded foam and liner composite). If you have a Johns Manville-branded encapsulation in your crawl now, the label sits on the liner face or on the tape roll, and it should name either a gauge (e.g., 10-mil, 12-mil, 20-mil) or a product series. Boulder City homes built between 1975 and 1998 frequently have 6-mil clear poly, which isn’t a true encapsulation; more recent installs may use a 10-mil or 12-mil reinforced product.
Here’s the compatibility gotcha we see most: Johns Manville reinforced liners are typically specified with a butt seam or overlap seam and a specific pressure-sensitive or butyl tape, and if a prior installer mixed in a competing tape, the seam delamination starts within two or three summers in the Mojave heat. Another: 20-mil liners need different perimeter fastening and edge detail than 10-mil, so a like-for-like swap isn’t always a like-for-like job. OEM matching is best for continuity of warranty and seam chemistry. Aftermarket equivalents from a comparable manufacturer are fine for repairs where you’re not re-taping the whole system, though we’ll always tell you which product we’re specifying and why. We’re an independent service provider, not affiliated with Johns Manville, so we recommend what fits the crawl, not what fits a brand line.
Signs Your Johns Manville Crawl Space Encapsulation Is Failing

- Musty odor rising through the floor. Moisture is bypassing the liner through a failed seam or unsealed penetration, and it’s feeding microbial growth on the joists above. This is the first symptom in nearly every Boulder City job we walk into.
- Standing water under the liner. The liner has torn, slipped off a pier, or was installed without a sump or drainage relief and the hydrostatic pressure in our local caliche-heavy soil is pushing water up. Once liner is in standing water, it’s a replacement, not a repair.
- Visible condensation on the liner face. The vapor barrier isn’t doing its job, usually because the liner is 6-mil or the seams were taped with the wrong product. Summer dew points in Boulder City routinely exceed 55°F, and that’s enough to bead the whole crawl.
- Liner detaching from foundation walls. The mechanical fasteners or adhesive have failed and the liner has sagged. Often this means the perimeter was never sealed properly on the original install, and re-attaching without addressing the perimeter seal will fail again.
- Rust on HVAC boots and floor joist hangers. This means the ambient humidity in the crawl has been above 60% for a sustained period. If you’re seeing rust on metal, the encapsulation has been failing for at least a full year.
Replacement Cost & What’s Included
Installed pricing on a Boulder City encapsulation replacement breaks down roughly like this:
| Scope | Typical Installed Range |
|---|---|
| 10-mil liner replacement, existing crawl, no drainage | $2,400 – $4,800 |
| 12-mil reinforced liner, sealed seams, full perimeter | $3,800 – $6,200 |
| 20-mil heavy liner with drainage relief or sump | $6,800 – $9,200 |
| Add: dehumidifier with electrical hookup | $1,400 – $2,900 |
| Add: minor joist repair or insulation removal | $400 – $1,800 |
Parts plus labor is bundled in those figures; we don’t mark up the liner above manufacturer list, and the labor is quoted as a flat number. What drives the range: square footage of the crawl, whether the old liner needs removal, drainage work, whether we’re adding a dehumidifier, and whether we’re coordinating with a sump install. Under Haven Standard Clause 1, you get a written price, a written scope and a written warranty before anyone lifts a tool. The 365-Day Done Right Promise applies: if the liner fails in a way it shouldn’t within the first year, we make it right.
DIY or Call Us?

Here’s the honest split. You can safely lift your crawl hatch, look in with a flashlight and photograph what you see. You can check the label on the liner, measure the liner gauge if you have calipers, and see whether water is standing under it. You can also read the model on any dehumidifier or sump that’s down there.
What we don’t recommend: crawling into a space with standing water, live wire nuts on a dehumidifier, or visible mold on the joists. Boulder City crawl spaces routinely exceed 90°F in summer and 100% humidity under a failed liner – not a place to spend two hours taping seams. If the liner has to be removed and replaced, the cut and haul alone is a two-person job, and getting a seam re-taped at 20-mil without a second set of hands tends to fail within a year. Call (844) 320-7926 and we’ll tell you in five minutes whether you need a full swap or just a repair.
FAQs
A correctly installed Johns Manville 20-mil liner exposed to standard crawl space conditions lasts 20 to 25 years; 10-mil liners typically fail at 8 to 12 years, especially under consistent summer exposure to 100°F-plus temperatures in a Boulder City crawl. The failures we see most are seam-driven, not liner-driven, which is why the tape and the install pattern matter as much as the gauge. Call (844) 320-7926 for a written replacement price – estimates are free.
Yes, if the failure is localized: a single delaminated seam, a tear under 12 inches, or a liner that has slipped off one pier but is otherwise intact. A repair runs $180 to $450 depending on scope and typically takes two to three hours. If you’ve got standing water under the liner or more than 15% of the surface is compromised, replacement is the more honest call. Call (844) 320-7926 and describe what you’re seeing – we’ll tell you straight.
A 1,200-square-foot crawl space with an existing liner typically takes one day to remove, one day to install and detail, and a half day for the dehumidifier if one is going in. Larger crawls or those needing joist work push to three or four days. We give you the schedule in writing before we start, and we don’t leave a job half-sealed overnight.
We source Johns Manville materials through distributors we’ve worked with since we opened, and we source from Owens Corning, Knauf, Rockwool, CertainTeed, Icynene, Demilec and GreenFiber the same way – no proprietary product lock-in. If you’ve got an existing Johns Manville system and want a like-for-like replacement, we’ll match the gauge and series. If you’d prefer a different manufacturer’s liner at a better price point for the same performance spec, we’ll quote that too. We also handle Reflectix reflective barrier in the same crawl scope where it makes sense.
Yes. Every job gets a Documented Photo Record – pier wraps, perimeter seal, seam detail, dehumidifier placement, all of it – so you have proof of what was done. Where the job allows a blower-door reading before and after, we publish both numbers. Under Haven Standard: Arrive on schedule, you get a named technician and a text when they’re on the way.
For a written price on your Boulder City crawl space encapsulation, call (844) 320-7926. A live person answers 24/7, and we’ll bring a Free Second Opinion read of any competing estimate you already have. We serve Boulder City and the surrounding neighborhoods, including properties near Bootleg Canyon, Boulder City Historic District, and Lake Mead View Estates.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.