Rockwool Crawl Space Encapsulation: The Boulder City Owner’s Guide
We install Rockwool-compatible crawl space encapsulation in Boulder City, and most full-crawlspace jobs here run $3,800 to $9,500 installed, depending on square footage, vapor barrier thickness, and how much floor prep the crawl needs. Smaller partial encapsulates start around $1,900. We can usually get a technician out the same day you call, and every job starts with a written price before anyone lifts a tool.
Owners in Boulder City usually discover a failing Rockwool encapsulation system the same way: a musty smell that shows up in the living room in July, fiberglass or mineral wool batts sagging off the joists after a monsoon season, or a utility bill that jumped 20% with the first week of 105-degree heat. Rockwool itself is a mineral wool product, and it’s vapor-permeable by design, which is exactly why the encapsulation assembly around it matters more than the wool.
Key Takeaways
- Rockwool mineral wool is vapor-permeable, so a failed vapor barrier lets Boulder City humidity straight into the batts.
- Full-crawlspace encapsulation installed in Boulder City typically runs $3,800 to $9,500.
- We’re an independent service provider, not affiliated with Rockwool.
- Every job gets a written scope and written warranty before we start, backed by the 365-Day Done Right Promise.
Which Rockwool Models This Applies To
Rockwool’s residential crawl space and floor insulation shows up in Boulder City mostly as ComfortBoard 80 and ComfortBoard 110 rigid boards on foundation walls and rim joists, and ComfortBatt batts between floor joists. The number after the model name is a compressive-strength rating in kilopascals: ComfortBoard 80 handles 80 kPa, ComfortBoard 110 handles 110 kPa. Both are the same mineral wool core; the denser board resists compression better where a homeowner might kneel or store things.
To match the right board, measure the existing thickness (ComfortBoard comes in 1-inch up to 4-inch thickness) and check the label printed on the board face. The R-value per inch for Rockwool ComfortBoard is roughly R-4.2, so a 2-inch board delivers about R-8.4. The OEM-versus-aftermarket decision here is real: Rockwool ComfortBoard is a specific mineral wool board with a water-repellent treatment, and substituting a firmer or softer board changes the compression and drainage behavior against a Boulder City block foundation. We source genuine Rockwool when the assembly calls for it, and we’ll tell you plainly when a substitute performs just as well in your specific crawl.
Signs Your Rockwool Crawl Space Encapsulation Is Failing

Mineral wool doesn’t rot, but the system around it does. Here’s what failure actually looks like in a Boulder City crawl:
- Musty odor in the living space. The vapor barrier has a breach, and warm exterior air is condensing on the cold side of the Rockwool. Odor is usually the first sign, not the last.
- Sagging or fallen batts. Rockwool ComfortBatt held up by friction-fit or light facing can drop after a hot, dry summer followed by monsoon humidity. When batts sag, they leave a thermal gap at the top of the joist bay.
- Standing water or damp soil. Failures start as grade and drainage problems, not insulation problems. Encapsulation holds water against the wool if the crawl drains poorly.
- Visible mold on the faced side of the barrier. That usually means the encapsulation liner is on the wrong side of the assembly for Boulder City’s dry-to-wet swing, or the seams were taped with the wrong product.
- Rising energy bills and cold floors. A home losing conditioned air through a breached barrier measures high on a blower-door test. We’ve seen Boulder City crawls read 4,000+ CFM50 before sealing and drop below 2,000 after.
Replacement Cost & What’s Included
Installed Rockwool-compatible crawl space encapsulation in Boulder City prices out like this:
| Scope | Installed Price Range |
|---|---|
| Partial encapsulation, 400-800 sq ft, 10-mil vapor barrier | $1,900 – $3,800 |
| Full encapsulation, 800-1,500 sq ft, 12-20 mil reinforced liner | $3,800 – $7,200 |
| Full encapsulation with wall board (Rockwool ComfortBoard) and rim joist work | $6,500 – $9,500 |
| Insulation removal and disposal of failed material | $600 – $1,800 |
What moves you up the range: square footage, barrier thickness, sump and dehumidifier scope, and how much prep the crawl needs before a liner goes down. Every price includes the written scope, written warranty, and a Documented Photo Record on completion. On applicable jobs we publish before-and-after blower-door readings so you can see the air-sealing result in one number. The 365-Day Done Right Promise covers all completed work.
DIY or Call Us?

You can safely check grading around your foundation, look for standing water in the crawl, and photograph the vapor barrier for signs of tears or lifted tape. What we don’t recommend is a full reinstall yourself. Crawl space encapsulation is a containment system: the liner, the seams, the wall terminations, and the drainage all have to work together, and a liner installed over unsealed penetrations traps moisture instead of keeping it out. Rockwool against a damp wall is only as good as the vapor barrier in front of it.
Beyond the performance problem, a full crawl re-do involves confined-space work, potential rodent contamination, and moisture readings that determine the whole assembly. That’s the diagnosis part, and it’s why the job starts with a written price and a site assessment rather than a walkthrough and a verbal guess. If you’ve got a Rockwool board that’s loose or a barrier with a visible breach, call us at (844) 320-7926 and we’ll tell you what we’d do next.
FAQs
The Rockwool itself lasts 30+ years in a properly encapsulated crawl, but the encapsulation assembly around it typically needs repair or replacement in 10 to 15 years here. Boulder City’s dry-to-wet seasonal swing is the driver: dry winters pull moisture out and monsoon humidity pushes it back in. We’ve inspected Boulder City crawls where the mineral wool was still intact but the vapor barrier and seam tape were the failure point, which is why we treat the barrier as the wear item and inspect it on every visit.
Often, yes. A single failed seam, a torn liner, or a fallen batt can be repaired without removing the Rockwool, and that’s the cheaper path when the board itself is still dry and intact. Full replacement makes more sense when there’s widespread mold, standing water, or rodent damage. We’ll tell you which case you’re in after we’ve read the crawl, not before. Call (844) 320-7926 for a free estimate and a free second opinion on any written quote you already have.
A partial re-do on a Boulder City crawl under 800 square feet is usually a one-day job, and full encapsulation with wall board typically runs two days. We’ll confirm the timeframe in your written scope before anyone starts. The blower-door reading happens after the work is sealed, so you walk away with documentation that shows the change.
We source genuine Rockwool ComfortBoard and ComfortBatt from our named suppliers, alongside Owens Corning, Johns Manville, Knauf, and others, so there’s no proprietary product lock-in. We’re an independent service provider and not affiliated with Rockwool. Our technicians have up to 10 years of experience, and every job ships with a Documented Photo Record on completion. Call (844) 320-7926 for pricing and a written estimate before any work starts.
Written by the team at Envelope Insulation Boulder City, serving Boulder City and nearby areas.