Spray Foam Insulation Cost in Boulder City, NV: What You’ll Actually Pay
Open-cell spray foam in Boulder City runs roughly $1.00 to $1.50 per board foot, and closed-cell runs about $2.00 to $3.50 per board foot. In a Boulder City retrofit, though, the more useful number is this: a targeted air-sealing scope using one to two gallons of two-component foam at the worst leakage sites often comes in under $400 and moves the blower-door reading measurably. Spray foam is priced here as a prerequisite, not an upsell. Call (844) 320-7926 and we’ll put that written price in front of you before any work starts.

Why Boulder City Retrofits Are Their Own Animal
Boulder City has one of the most unusual housing stocks in Nevada. The core of town is made up of the Boulder Homes, built by the federal government in the 1930s and ’40s for dam workers. They’re small single-story houses, often with solid masonry or single-board walls and no wall cavity to fill at all. The attic floors are lined with little to nothing. When a technician opens a wall in one of these houses, the only thing that was ever meant to slow heat transfer is sometimes 1930s newspaper or horsehair.
That changes the whole cost conversation. A 2026 code chart tells you how much R-value a new house needs in this climate. It doesn’t tell you what a house designed before air conditioning needs in July, when unlined attics push past 150°F and the high is over 100°F for weeks. The retrofit is less a matter of hitting a number and more about reverse-engineering a 90-year-old experiment – sealing what leaks, then insulating what’s left.
That’s why we start with a blower-door test – a pressurization reading that shows, in one number, how much conditioned air the building envelope is losing – before foam goes anywhere near the attic floor. You can’t price a spray foam job honestly without knowing which three square feet of your attic floor are responsible for a huge share of the leakage.
Open-Cell vs. Closed-Cell: Pick by Application, Not Price

The per-board-foot price is the easy part. The harder part, and the one that determines whether the job works, is which foam belongs where. In Boulder City the winter nights drop near freezing even though the summers are brutal, and occasional winter moisture events are real. That matters.
- Closed-cell foam carries vapor-retarding properties and a higher R-value per inch. It’s the right call where you need both a thermal and a moisture barrier, and where you’re dealing with the sort of winter moisture that would condense on a colder surface.
- Open-cell foam costs less per R and is the better fit for interior air-sealing details where vapor control isn’t the point and cost-per-R is. It’s also forgiving to apply around irregular penetrations.
- Targeted spot-sealing is where both types earn their keep in this town. Top plates, recessed light housings, plumbing and electrical penetrations – these are the details, not the whole attic, that a blower-door test flags.
Whole-attic encapsulation pricing that you’ll see on generic spray-foam pages is written for homes that can justify it. Most Boulder City houses can’t. What they can justify is an airtightness outcome on a written scope – and that’s the product we sell.
Spray Foam Insulation Cost: Line-Item Ranges
| Item | Typical $ Range |
|---|---|
| Pre-seal blower-door test (baseline reading) | $150 – $350 |
| Targeted spot-sealing (top plates, can lights, penetrations) – 1-2 gal two-component foam | $300 – $600 |
| Post-seal blower-door test (verification reading) | $150 – $350 |
| Open-cell foam, attic air-sealing details | $1.00 – $1.50 / board foot |
| Closed-cell foam, vapor-retarding assemblies | $2.00 – $3.50 / board foot |
| Blown-in or batt insulation, added after sealing | $1.50 – $3.50 / sq ft |
Two things to notice about that table. First, the targeted sealing scope is usually the cheapest line on it, and it’s the one that does the most work. Second, the blower-door readings sit on the invoice as their own line – because the airtightness outcome they document is the thing you paid for. That’s the way we run every job: sealed first, then insulated, in that order, with the numbers to prove it.
Fire safety and worker safety both matter in this trade. Foam is applied by trained technicians wearing proper respiratory protection, and we don’t hand a two-component foam gun to a homeowner. If you’re considering the foam route on your own, get a professional to do the sealing – the risks are real and the readings are worth it.
What the Written Scope Looks Like

Before anything is applied, you get a written price and written scope. It names exactly which penetrations will receive foam, documents the pre-seal blower-door reading, and states the post-seal number we expect to hit. That way you’re buying a documented air-tightness outcome, not a volume of foam someone eyeballs on the day.
On the attic floor itself, we won’t blow insulation over an unsealed surface. If top plates, can lights and penetrations aren’t sealed first, you’re paying to cover the leaks, not to close them. The foam goes in first at the flagged spots. Then the insulation installation in Boulder City goes over the top – and we source from Owens Corning, Johns Manville, Knauf and Rockwool, so there’s no proprietary product lock-in on the finished job.
A lot of the spray foam pricing you see quoted online is written as a surprise line item that appears once the attic is already open. Ours is on the estimate from the first conversation. Haven Standard Clause 1 is flat price, written scope and written warranty before anyone lifts a tool – and we hold to it. Every job also closes with a Documented Photo Record, so you can see exactly where the foam went and how much was used.
The 2016 Baseline and the 9,000 Homes
We’ve sealed and insulated more than 9,000 homes since 2016, and every one of those jobs got a written price before work started and a documented record when the crew left. Our technicians have up to 10 years of experience with blower-door testing and envelope work, and they’re background-checked. The 365-Day Done Right Promise backs every completed job: if it’s not done right, we make it right.
If you already have a competing estimate, bring it. Our free second opinion means we’ll read it with you line by line – we won’t pressure you into a second visit to make it stick. That’s the same principle behind the documented photo record on every visit and the live person who answers the phone around the clock.
FAQs

Open-cell spray foam runs about $1.00 to $1.50 per board foot and closed-cell runs $2.00 to $3.50 per board foot. For the targeted air-sealing scope most Boulder City retrofits actually need – top plates, recessed lights, penetrations, sealed with one to two gallons of two-component foam – the job often lands under $400, plus the blower-door tests that document the result. Call (844) 320-7926 for an exact quote; estimates are free.
Most Boulder City homes need spot-sealing, not whole-attic encapsulation. The Boulder Homes and the mid-century ranches around them rarely justify the cost of encapsulating an entire attic – and a blower-door test usually shows that a handful of penetrations are responsible for a disproportionate share of the leakage. Sealing those first and insulating after gets you measurable improvement for a fraction of the cost. Call (844) 320-7926 and we’ll run the test and tell you what your attic actually needs.
It depends on where the foam is going. Closed-cell costs roughly twice as much per board foot but adds vapor-retarding properties and more R per inch, which matters in the assemblies that see Boulder City’s occasional winter moisture. For interior air-sealing details where vapor control isn’t the goal, open-cell gets the job done for less. Call (844) 320-7926 and we’ll help you decide based on the specific details in your home.
Yes. On every applicable job, we publish the before-and-after blower-door readings – the baseline CFM50 figure taken before sealing and the number after – so you can see in a single measurement how much air your envelope was losing and how much was closed. Call (844) 320-7926 to schedule a reading and a written estimate.
Get a Written Price Before Any Work Starts
If you’re weighing spray foam against the numbers on this page, the fastest way to know what your Boulder City home actually needs is a blower-door test and a written estimate. Call (844) 320-7926 – a live person answers around the clock, and you’ll have a flat written price, a named scope and a free second opinion on any competing quote in hand before anything starts. Estimates are free.
Written by the team at Envelope Insulation Boulder City, serving Boulder City, NV.
What Our Customers Say
"They air-sealed the attic floor before insulating and showed me the blower-door number before and after. The upstairs is finally the same temperature as downstairs."
- Marisol D."The winter gas bill dropped by about a third. They had estimated a quarter, so they under-promised."
- Genevieve R."Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P.