Fast, Reliable Wall Insulation Across Boulder City
Wall insulation in Boulder City is not a cavity-fill job the way it is almost everywhere else in Nevada. Most of the older homes here sit on a grid of streets near the Boulder City/Hoover Dam line, and a good share of those are the original Boulder Homes, built in the 1930s and ’40s with solid masonry or single-board exterior walls and no cavity at all. We’ve opened enough of those walls to know what’s behind the plaster: 1930s newspaper, horsehair batting, and empty air. If you live in Boulder City and you’re tired of a west wall that bakes in July and stays cold in January, call us at (844) 320-7926 for a free written estimate. We get to the neighborhoods around town quickly and we bring the plan, not a sales pitch.
Our Wall Insulation team builds retrofits around 90-year-old federal housing stock rather than around the modern Nevada energy code, because in Boulder City code numbers are almost beside the point. The house was never designed to hold insulation. So we work out how to add it.
Why Envelope Insulation Boulder City Is Boulder City’s Preferred Wall Insulation Company
Boulder City is a small city, and small cities notice how contractors treat them. We’re independently owned and operated under The Haven Standard, which means every job starts with a written price and ends with a documented record. Homeowners here have come to expect the before-and-after blower-door number, not a pat on the back. We’ve sealed and insulated thousands of homes across the Las Vegas Valley, and the wall work in Boulder City is distinctive enough that we treat it on its own terms.
That matters most in the older core. When we open a wall in a Boulder Home and find no cavity, we don’t blow into a void and call it done. We tell you what we found, in plain terms, and the number that came out of the blower-door test shows whether the plan worked. On jobs where a written blower-door reading applies, you keep the before and the after. If it’s not done right, the 365-Day Done Right Promise covers it: we make it right. A live person answers the phone around the clock, and a named technician texts when they’re on the way. We cover Boulder City addresses including the areas near the historic district, the Hemenway Valley stretch, and the newer infill off Adams Boulevard. If you’re north of the 1930s core or down toward the lake, we can be there.
Our Wall Insulation Services in Boulder City

Because Boulder City walls come in two very different flavors, solid masonry and single-board on the old stock, and thin batt walls on the mid-century ranch infill, the right fix is not the same house to house. Here’s how we approach each.
Exterior Wall Insulation in Boulder City
Exterior insulation is often the only realistic path in a Boulder Home, because the building has no cavity to fill. We add rigid board to the outside face of the masonry, then re-clad it, which turns a 90-year-old solid wall into an insulated wall and keeps the thermal mass working in the desert. We specify Owens Corning or Johns Manville rigid board and set the thickness based on what your roofline and window depths will accept without a teardown.
Injection Foam Wall Insulation in Boulder City
Where a wall does have small or irregular voids, such as a single-board construction with air pockets behind the plaster, injection foam fills what’s there and seals small gaps at the same time. It’s a clean, fast job when the wall can take it, and it’s not the right tool on solid masonry with nothing to fill. We check first. We don’t guess.
Drill & Fill Wall Insulation in Boulder City
Drill-and-fill is the standard cavity-fill method: holes drilled between studs, insulation blown in, holes patched. In a mid-century ranch around the Hemenway Valley or the newer infill sections, this works well and we use it. On a solid Boulder Home wall it doesn’t, and we say so before anyone starts. Where the wall qualifies, we use Knauf loose fiberglass or stabilized cellulose and check the density as we go.
Interior Wall Soundproofing in Boulder City
Plenty of our Boulder City calls are about noise, not energy, especially in the small prewar houses where bedrooms share thin interior walls. We add dense batts plus acoustic sealing at plates and outlets so sound stops at the wall instead of bouncing through. It’s a discrete job and it doesn’t disturb your exterior facade.
Trusted Brands We Service in Boulder City
We work with insulation made by Owens Corning, Johns Manville, Knauf and Rockwool, and we don’t carry a proprietary product lock-in, so we pick what actually fits your wall assembly rather than what’s sitting in a warehouse. For a solid Boulder Home exterior, that’s often Johns Manville rigid board. For a mid-century ranch cavity, it’s Knauf loose fill. For sound work, Rockwool. We don’t stock parts locally and we don’t run our own fleet; independent local professionals perform the work, and we coordinate so you get the right material delivered on schedule for a fast turnaround.
Common Wall Insulation Problems We See in Boulder City Homes

- Solid masonry and single-board walls with no cavity. Conventional drill-and-fill has nothing to fill on a Boulder Home, so a technician comes out, drills a test hole, and hits brick or board. Performance stalls until you add an actual insulation layer on the outside or build it in on the inside.
- Original horsehair and 1930s newspaper. The horsehair batting and old newspaper that show up behind plaster walls have degraded and settled over the decades, leaving voids against the plaster. A visual inspection reads as “insulated,” but a blower-door test tells you it isn’t.
- Unlined hot attics that undo wall work. The original Boulder Homes have unlined attic spaces that hit 150°F in July, and heat drives down through walls faster than a modest wall retrofit can reject it. Wall-only jobs underperform until the roof deck is addressed at the same time.
- Thin-batt walls on mid-century ranch infill. The ranch infill around the core has batt walls that were thin to begin with, and extreme solar gain on west elevations plus near-freezing winter nights exposes gaps at top plates and penetrations. Air sealing comes first, then insulation.
In a typical Boulder Home, a tech opening a wall to add cavity insulation instead finds solid masonry or a single board layer, with 1930s newspaper and horsehair batting serving as the only original “insulation.” Since there’s no stud bay to blow into, the usual fix is either exterior rigid board plus a new cladding layer or an interior furring-and-foam build-out, decided after checking plaster condition and attic ventilation. Otherwise the July attic will undo most of the wall work.
Pricing for Wall Insulation in Boulder City, NV
Boulder City wall work prices differently than a cavity-fill job in Henderson, and that’s a fact you should see before you commit. A typical exterior rigid board retrofit on a single-story Boulder Home runs $6,000 to $14,000 depending on square footage and cladding. Interior furring-and-foam build-outs run $65 to $95 per linear foot of wall. Injection foam runs $4 to $7 per square foot where a cavity exists. Interior wall soundproofing runs $900 to $2,400 per wall. Where a wall-only job won’t hold its gain without attic work, we tell you and price both together so you see the real number, not a partial one. Every price is written before any work starts, and we’ll read a competing estimate with you at no charge. Call (844) 320-7926 for a free estimate.
We Also Serve Cities Near Boulder City

Our crews also handle Wall Insulation in Boulder City and the surrounding area, including Henderson, Whitney, Paradise and Enterprise. If you’re just over the hill in Henderson or further in toward Paradise, the same written price and documented record come with the job. The wall construction changes, but the process doesn’t.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Wall Insulation in Boulder City

Usually not, because most Boulder Homes were built with solid masonry or single-board walls that have no cavity to blow into. A technician confirms that with a test hole before quoting. When a cavity does exist, drill-and-fill works; otherwise we plan exterior rigid board or an interior build-out. Call (844) 320-7926 for a free written estimate.
In most of the original Boulder Homes, what’s inside the wall is a layer of 1930s newspaper and horsehair batting against the plaster, and air. There is no stud bay and no modern insulation. That’s the reality of a 90-year-old federal housing experiment, and any plan has to account for it. Call (844) 320-7926 and we’ll walk you through what we’d do.
Attic first, almost always, because an unlined Boulder Home attic hits 150°F in July and that heat drives down through walls faster than a modest wall retrofit can reject it. Insulating walls without addressing the roof deck usually underperforms. We sequence the work so the gain you pay for holds. Call (844) 320-7926 for an exact quote, and estimates are free.
Not the way you would on a frame wall. Solid masonry needs to dry toward the exterior, so a vapor barrier in the wrong place traps moisture and causes trouble. Exterior rigid board with a properly detailed weather barrier is usually the right approach. We spec it per assembly, not generically. Call (844) 320-7926 to talk through your wall.
It helps with both. Boulder City winter nights drop near freezing, and every solar-gain retrofit we do still pulls down the modest but real heating load. Summer heat rejection is the bigger prize, but the same wall assembly works year round. Call (844) 320-7926 for a free estimate and we’ll price it in writing.
Contact Us for Wall Insulation in Boulder City
If your Boulder City home was built in the 1930s or ’40s and you suspect there’s nothing in the wall but old newspaper, or if you’re in a mid-century ranch where the west wall bakes every July, we can look at it and give you a written price before any work starts. Call (844) 320-7926 for a free estimate. A named technician will text when they’re on the way, a live person answers around the clock, and you walk away with a documented photo record and, on applicable jobs, the before-and-after blower-door number. That’s the record you keep.
Written by the team at Envelope Insulation Co.
