Fast, Reliable Wall Insulation Across Enterprise
If you live in an Enterprise tract home built between the 1990s and the 2010s, your walls already have insulation in them. What they have is builder-grade R-13 fiberglass, installed to the minimum, and by now that means compressed batts, gaps at top plates, and a west-facing wall that soaks up Mojave Desert sun all afternoon. Wall insulation work in Enterprise is mostly upgrade and retrofit, not new install. We know these subdivisions, we know the ZIP code 89139 corridors, and we can usually get a technician out to look at your walls within a day or two of your call. Reach us at (844) 320-7926 and a live person answers.
Why Envelope Insulation Boulder City Is Enterprise’s Preferred Wall Insulation Company
We work in Enterprise often enough that the housing stock isn’t a surprise anymore. Two-story stucco-on-frame, small lots, attached garages, trussed attics, tightly packed subdivisions off the 89139 retail corridors and along the Blue Diamond and Jones corridors. That context matters, because a wall insulation recommendation for a 1998 tract home is not the same as one for a townhome near the newer retail.
Every job under The Haven Standard starts with a written price and a written scope before anyone lifts a tool, and ends with a documented record. On applicable jobs we publish before-and-after blower-door readings, a pressurization measurement that shows in one number how much conditioned air the home was losing before and after the work. That’s the evidence you paid for, not a feeling. Our technicians have up to 10 years of experience, they’re background-checked, and they show up when we said they would.
Bring us a competing written estimate from another Enterprise contractor and we’ll read it with you. That’s a free second opinion, and it costs you nothing. If it’s not done right within 365 days, we make it right.
Our Wall Insulation Services in Enterprise

These are the wall services Enterprise homeowners ask for most. Each one solves a different problem, and the right answer depends on what a blower-door test and thermal imaging actually show in your walls.
Injection Foam Wall Insulation
Injection foam goes into existing wall cavities through small holes, expanding to fill the gaps where fiberglass has settled or never filled properly. In Enterprise’s two-story stucco homes, this is often the most effective way to close the top-plate gaps that let attic heat radiate down into upstairs bedrooms. We use closed-cell products from Icynene and similar manufacturers, and we patch the access points so you can’t tell where we worked.
Drill & Fill Wall Insulation
Drill and fill works by drilling into each stud bay, blowing in loose-fill fiberglass or cellulose, then plugging and finishing the holes. For a 1990s – 2010s Enterprise tract home with empty or sagging cavities, it’s often the most cost-effective upgrade available. Brands like Knauf and CertainTeed make the loose-fill products we typically specify for this. Expect a full day for a typical two-story home.
Exterior Wall Insulation
Enterprise sits in the Mojave Desert, which means west-facing exterior walls absorb intense heat through the afternoon and conduct it straight into the rooms behind them. Adding rigid foam or a properly detailed radiant barrier on the exterior side of those walls cuts that heat load before it ever reaches your interior. Combined with air sealing, it takes real pressure off the cooling system during peak summer.
Interior Wall Soundproofing
Dense-pack insulation in shared interior walls quiets the rooms that share a wall with a bathroom, laundry, or kids’ bedroom. In Enterprise’s tighter new-build townhomes and apartments near the 89139 retail corridors, this is one of the more common upgrade requests. We use Rockwool where fire and acoustic performance both matter.
Trusted Brands We Service in Enterprise
We specify materials from Knauf, Rockwool, CertainTeed, and Icynene depending on the cavity, the climate exposure, and your budget, and we’re not locked into a single manufacturer. No proprietary product pushes, no upsell to a brand that pays us a spiff. Materials are sourced per job for the specific scope in front of us, and turnaround on a standard Enterprise wall job is typically a few business days from the written price. Ask us for the spec sheet on any product we quote and we’ll hand it to you before you sign anything.
Common Wall Insulation Problems We See in Enterprise Homes

- Builder-grade R-13 batts that have sagged or compressed. In Enterprise’s two-story tract walls, fiberglass batts settle over time and leave uninsulated gaps at top plates and around electrical outlets, which lets attic heat radiate straight into upstairs bedrooms.
- Kneewall and attic-floor insulation over attached garages that’s missing or disturbed. This is the most common cause of a room over the garage running 5 – 10°F hotter than the rest of the house, and it’s a direct thermal bridge we see in Enterprise constantly.
- Sun-baked west-facing walls with no radiant barrier. Mojave Desert afternoons push exterior wall temperatures high enough to overwhelm the cooling system when there’s nothing between the sun and the interior drywall but stucco and framing.
- Air leaks that get insulated over instead of sealed first. Blowing insulation into a cavity without sealing the penetrations first means the new material does less than it should. Sealed first, then insulated, in that order.
Why Upstairs Bedrooms in Enterprise Bake While Downstairs Stays Cool
This is the single most common complaint we hear from Enterprise homeowners, and it usually isn’t the walls themselves. It’s the attic floor and kneewalls over attached garages and front porches, plus sun-baked west-facing roof planes, that let attic heat pour into the rooms above. Fixing that separation between the attic and the conditioned space is often more effective, and cheaper, than adding wall R-value alone. A blower-door test tells you which problem you actually have before you spend a dollar.
Pricing for Wall Insulation in Enterprise, NV

Most wall insulation upgrades in Enterprise run between $1,800 and $4,200 for a typical two-story home, with the range driven by wall square footage, whether we’re doing drill-and-fill versus injection foam, and how much attic-floor air sealing is needed. Drill-and-fill for a single wall section often lands around $800 – $1,500. Full exterior wall insulation with rigid foam runs higher, typically $3,500 – $7,000 depending on the accessible wall area. Every Haven Standard job starts with a flat written price and a written scope before any work begins. Call (844) 320-7926 for an exact number on your home.
We Also Serve Cities Near Enterprise
We also work in the neighboring communities of Spring Valley, Paradise, Winchester, and Henderson, so if you’re near the Enterprise border and not sure which side you’re on, just ask. Our Wall Insulation team coordinates the schedule across the valley and can tell you which crew covers your address.
Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Wall Insulation in Enterprise
Probably not on its own. In most Enterprise two-story homes, the overheating comes from kneewall and attic-floor gaps over the garage and front porch, plus west-facing roof planes, not from thin wall insulation alone. We air-seal the attic floor, add baffles for ventilation, and then decide whether wall cavities need injection foam or drill-and-fill. Call (844) 320-7926 and we’ll run a blower-door test to confirm before you commit to anything.
Drill-and-fill with loose-fill fiberglass or cellulose, paired with attic-floor air sealing. It targets the biggest thermal leaks in a tract home for a fraction of the cost of full exterior wall work. Most Enterprise jobs in this category land in the $1,800 – $3,200 range. Call (844) 320-7926 for a written price on your specific address.
Yes. Drill-and-fill and injection foam both work from the exterior or interior side through small access holes, then get patched and finished. You keep the original stucco. It’s the standard method for Enterprise’s stucco-on-frame tract homes, and we’ve done it hundreds of times. Call (844) 320-7926 and we’ll tell you which approach fits your wall assembly.
A blower-door test and thermal imaging tell you in about an hour. Thermal imaging shows cold or hot spots in the wall that indicate gaps or settled batts, and the blower-door reading quantifies the whole envelope’s air leakage. We include the readings and photos in your documented record. Call (844) 320-7926 to schedule an assessment.
Knauf, Rockwool, CertainTeed, and Icynene are the ones we specify most often, chosen for the specific cavity and climate exposure. We aren’t locked into any single manufacturer, so we’ll quote the product that fits your wall assembly and budget. Call (844) 320-7926 to talk through options for your Enterprise home.
Ready to stop guessing why your upstairs stays hot? Call (844) 320-7926 for a free estimate on wall insulation in Enterprise, and we’ll walk you through what the numbers look like before any work begins.
Written by the team at Envelope Insulation Boulder City.
