Fast, Reliable Blown-In Insulation Across Boulder City
If you live in a Boulder City home that was built before air conditioning was standard, your walls and attic are probably working against you every July. We know this housing stock up close. The Boulder Homes near the old downtown grid and the mid-century ranches off Nevada Way were never designed with cavity insulation, and that shows up in summer heat coming through interior walls and winter drafts that never quite go away. Our Blown-In Insulation work in Boulder City is built around that reality. Call (844) 320-7926 and a live person answers, day or night.
Why Envelope Insulation Boulder City Is Boulder City’s Preferred Blown-In Insulation Company
We work under The Haven Standard, which means a written price before any work starts, a written scope and warranty handed over before anyone lifts a tool, and a Documented Photo Record on every visit. In Boulder City, that record matters more than in most places, because the finding inside a 1930s wall (newspaper, horsehair, or nothing at all) is something you should see for yourself, not hear about secondhand.
Our technicians have up to 10 years of experience, are background-checked, and arrive in uniform. Response to Boulder City runs the same day in most cases, and we always text when the technician is on the way. On jobs where air sealing applies, we publish before-and-after blower-door numbers – a pressurization reading that shows, in one figure, how much conditioned air your home was losing before the work and after. The 365-Day Done Right Promise covers all completed work: if it’s not done right, we make it right.
Our Blown-In Insulation Services in Boulder City

Not every Boulder City home needs the same approach. A solid-masonry Boulder Home from the 1930s and a 1990s infill ranch off Adams Boulevard are two different jobs, and we scope them that way.
Dense-Pack Wall Insulation in Boulder City
Most original Boulder Homes have no wall cavity insulation at all – just plaster over masonry or single-board walls. Dense-pack cellulose is blown into the stud bays at a density high enough that it stays put and doesn’t slump, then the drill holes are patched and sealed. Done at the right density, it displaces the aged newspaper and horsehair we routinely find and closes the top-of-wall voids that let hot attic air bleed down.
Blown-In Cellulose in Boulder City
Cellulose is our default for Boulder City attics and walls. It packs tightly, handles the extreme attic heat that builds here in summer, and it’s made from recycled paper – a good match for homes that were themselves a federal experiment in low-cost construction. We source it from GreenFiber and other mills, and we never blow it in until the attic floor is sealed.
Blown-In Fiberglass in Boulder City
Fiberglass is a solid pick for newer Boulder City infill homes with standard batt-ready framing, and it holds its R-value well where the attic is properly ventilated. We use Owens Corning and Johns Manville products and choose fiberglass over cellulose only when the assembly actually calls for it, not by default.
Blown-In Top-Up in Boulder City
Original Boulder City attic spaces are often unlined and hit 150°F in July, and whatever insulation is up there has usually settled to a fraction of a modern R-value. A top-up brings the attic back to a working depth after we air-seal the top plates, can lights and penetrations. Sealed first, then insulated – in that order, every time.
Trusted Brands We Service in Boulder City
We install materials from Owens Corning, Johns Manville, Knauf and Rockwool, and we don’t lock you into a proprietary product. That matters for older Boulder City homes, where the right material depends on the wall assembly rather than a brand preference. We don’t stock parts on a truck or hold inventory locally; materials come from the mill for your specific scope, so what goes into your wall is what your written quote names.
Common Blown-In Insulation Problems We See in Boulder City Homes

- Settled or missing attic insulation in unlined 1930s attics. Decades of settling leave R-values far below modern standards, and with no radiant barrier the attic regularly exceeds 150°F in July.
- Dense-pack cellulose that slumps when installed at too low a density. We’ve opened walls on Boulder City homes where a previous job left top-of-wall voids that reopened the draft path.
- Original single-board walls with no cavity. These must be drilled and patched, and improper patching lets air and moisture back into a plaster-on-masonry assembly.
- Newspaper and horsehair as the only “insulation.” Opening an exterior wall in a Boulder Home routinely turns up 1930s newspaper or horsehair, which provides almost no thermal value.
Pricing for Blown-In Insulation in Boulder City, NV
We put the range on the page. Blown-in attic top-up in a typical Boulder City single-story home runs about $1,400 to $2,800 depending on square footage and the depth needed. Dense-pack wall insulation on a Boulder Home with solid masonry walls runs $3.50 to $6.00 per square foot of wall area, which reflects the drilling, patching and sealing on a plaster-on-masonry job. Full attic insulation with air sealing on a mid-century ranch typically lands between $2,200 and $4,500. Older unlined attics and homes needing insulation removal sit toward the top of these ranges. Every price is written before any work starts, and a Free Second Opinion on a competing estimate is available if you already have one.
We Also Serve Cities Near Boulder City

Boulder City sits close to a handful of communities we also cover, and we bring the same sealed-first approach to each. If you’re slightly outside the city limits, we still serve Boulder City and the surrounding area, including Henderson, Whitney, Paradise and Enterprise. Call (844) 320-7926 and we’ll confirm coverage and timing for your address.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Blown-In Insulation in Boulder City

Yes. Dense-pack cellulose can be blown into the stud bays of a Boulder Home even when the walls are plaster over masonry, using drilled holes that are then patched and sealed. We confirm the wall assembly first, because solid masonry and single-board walls need a different approach than a standard framed wall. Call (844) 320-7926 for an exact quote – estimates are free.
Most original Boulder City attics contain newspaper, horsehair, or nothing at all – rarely a modern product. When we open a wall or attic in a 1930s Boulder Home, finding 1930s newspaper as the only barrier is common. We document what we find with photos before recommending a top-up. Call (844) 320-7926 to schedule an attic inspection.
Boulder City’s 100°F-plus summers and near-freezing winter nights favor cellulose in most attics and walls because it packs densely and handles the extreme heat swings. Fiberglass is a good fit for newer infill homes with well-ventilated attics and standard framing. We choose based on your assembly, not a default. Call (844) 320-7926 for a free estimate.
Expect drilling into exterior walls, blowing cellulose to a specified density, then patching and sealing every hole. In a typical Boulder Home, the crew opens a wall, clears the aged newspaper and horsehair, fills the stud bays, and checks for top-of-wall voids before patching. The whole process is documented with photos you keep. Call (844) 320-7926 to get a written scope before work starts.
Not on its own. A vented attic needs air sealing at the top plates, can lights and penetrations before any blown-in insulation goes down, or the insulation just covers the leaks. That sealed-first order is a hard rule under The Haven Standard. Call (844) 320-7926 and we’ll scope your attic properly.
Written by the team at Envelope Insulation Co.